ddelong1
New Member
- Joined
- December 28, 2006
- Messages
- 5
- Reaction score
- 0
- City, State
- Asheville, NC
- Year, Model & Trim Level
- 2003 NBX V8 4x4
Hi all, I've got a 2003 Explorer that recently has developed a transmission issue on our Christmas vacation. While driving down the highway with the cruise control on the truck downshifted to maintain speed on an uphill climb. At the top of the rise, the truck wouldn't shift back into 5th gear and the overdrive light started flashing. The truck is now unable to shift into 5th gear and on the 1-2 shift it holds first up to approximately 4500 rpm. I took the truck back home and pulled the following codes:
P0732 - Gear 2 Incorrect Ratio
P0735 - Gear 5 Incorrect Ratio
P0775 - Pressure Control Solenoid B
I've done quite a bit of searching on this forum and it looks to me like it's a problem with the solenoid body. I was planning on heading to the dealership tomorrow to pick up a new one and do the repair myself following some of the detailed threads on this site. Please let me know if you think there is anything else I should check.
Thanks!
P0732 - Gear 2 Incorrect Ratio
P0735 - Gear 5 Incorrect Ratio
P0775 - Pressure Control Solenoid B
I've done quite a bit of searching on this forum and it looks to me like it's a problem with the solenoid body. I was planning on heading to the dealership tomorrow to pick up a new one and do the repair myself following some of the detailed threads on this site. Please let me know if you think there is anything else I should check.
Thanks!