Town Car
Member
- Joined
- April 2, 2007
- Messages
- 16
- Reaction score
- 0
- City, State
- Lancaster, CA
- Year, Model & Trim Level
- 2004 Sport Trac XLT
HI guys.
One of the things I needed to do with the new XLT was find the Keyless Entry Code. With the help of 'search' on this and some other places I was able to retrieve the code in about 5 minutes. Could have been faster but I was a bit leery prying on the new XLT
Basically it's like this:
Pry up one end of the Defroster Vent Cover. Spring fasteners hold down the side towards you, interlocking tabs hold down the side towards the windshield. With your fingers under the front side, pop each fastener up, all the way across the cab. You may find the center fastener a *****, so work from both ends.
From the outside looking in you will see the Keyless Entry Module under the Dashboard Panel. The 'engine' side of the Module has a large wire harness connected.
Because the Keyless Module is located under the Dashboard, you will have to look at the top of the module at an angle, maybe even enlist the use of a flashlight.
The five digit number is printed on the top of the module. Other stuff is printed on the labels as well, but the Code Number is the largest font there.
One of the things I needed to do with the new XLT was find the Keyless Entry Code. With the help of 'search' on this and some other places I was able to retrieve the code in about 5 minutes. Could have been faster but I was a bit leery prying on the new XLT
Basically it's like this:
- Pop off the Front Windshield Defroster Vent Cover.
- From the outside of the XLT look through the windshield at the Keyless Entry Module.
- The Factory Permanent Code is printed on a sticker, on the top of the module.
Pry up one end of the Defroster Vent Cover. Spring fasteners hold down the side towards you, interlocking tabs hold down the side towards the windshield. With your fingers under the front side, pop each fastener up, all the way across the cab. You may find the center fastener a *****, so work from both ends.
From the outside looking in you will see the Keyless Entry Module under the Dashboard Panel. The 'engine' side of the Module has a large wire harness connected.
Because the Keyless Module is located under the Dashboard, you will have to look at the top of the module at an angle, maybe even enlist the use of a flashlight.
The five digit number is printed on the top of the module. Other stuff is printed on the labels as well, but the Code Number is the largest font there.