colintrax
Elite Explorer
- Joined
- July 16, 2009
- Messages
- 2,762
- Reaction score
- 82
- City, State
- Georgia
- Year, Model & Trim Level
- 97 XLT
I'm replacing the window regulator in my brothers 2000 ranger. With the window all the way up there's zero tension on the spring, and it can fall off. I rigged up some duct tape to hold it in place, but there's gotta be something wrong. Any ideas?
On a side note, the window can't roll itself up. The motor whines but no movement. I replaced the regulator because the old one had some play in the arm, so I thought maybe it was pushing itself off the gear. I tore the motor apart and didn't see any damage to the gears.
Also, the autodown doesn't stop. I expected the new regulator to fix that but apparently not
Another side note, the window motor appears to be a replament. Branded "gmx" anyone know who sells this brand?
On a side note, the window can't roll itself up. The motor whines but no movement. I replaced the regulator because the old one had some play in the arm, so I thought maybe it was pushing itself off the gear. I tore the motor apart and didn't see any damage to the gears.
Also, the autodown doesn't stop. I expected the new regulator to fix that but apparently not
Another side note, the window motor appears to be a replament. Branded "gmx" anyone know who sells this brand?
