Stone-ok
New Member
- Joined
- August 7, 2006
- Messages
- 2
- Reaction score
- 0
- City, State
- NE Oklahoma
- Year, Model & Trim Level
- '01 Sport Trac
I have a 2001 Sport Trac with 4wd, and selector switch in the dash. I have recently tried to switch from 2wd to any of the the 4x4 settings (high or low), and the selector light in the cluster panel will not light up, nor does the differential switch. I have taken the in dash switch out and tested with continuity tester. The switch had a plug with black, yellow (w/ blue stripe), white (w/ black stripe), and a red (w/ black stripe) wires. I tested the corresponding prongs for each of the wires. There was a complete circuit when I tested the red & black prongs. However, when I tested the red (or black) with any of the other two - I received no complete circuit (with moving the switch to those related positions). To my old way of thinking, this tells me that the in dash switch is bad. Is this the correct way to test this switch, or is it possible that something else could be my concern?
Thank you for any help that you can give.
Stone-ok
Thank you for any help that you can give.
Stone-ok