lisfan
Active Member
- Joined
- December 2, 2008
- Messages
- 62
- Reaction score
- 0
- City, State
- boston mass
- Year, Model & Trim Level
- 2008 explorer xlt 4.0
hi guys
i recently replaced my blend door actuator, stripped gear as usual, while checking all the positions. i noticed the defrost wasnt blowing that great and i was getting heat at the bottom of the console vent , not much change from floor , mix or defrost. long story short, i pulled the radio and noticed the diaphram was was working with the yellow hose going to it but the door arm seemed broken on its shaft. do i have to pull the dash and replace the hvac or does someone have a door or a fix for this. i appreciate the help and thanks for any imformation .
it has manual / ac with roof vents on a 2004 xlt explorer 4.0. has this happened to others. 4L2z-19850-eb
is the part number for evaporator assy which comes not with plenum assy.391.00 quoted it lists for 610.00. does any one know any online dealers that are cheaper. i appreciate any help or imformation
i recently replaced my blend door actuator, stripped gear as usual, while checking all the positions. i noticed the defrost wasnt blowing that great and i was getting heat at the bottom of the console vent , not much change from floor , mix or defrost. long story short, i pulled the radio and noticed the diaphram was was working with the yellow hose going to it but the door arm seemed broken on its shaft. do i have to pull the dash and replace the hvac or does someone have a door or a fix for this. i appreciate the help and thanks for any imformation .
it has manual / ac with roof vents on a 2004 xlt explorer 4.0. has this happened to others. 4L2z-19850-eb
is the part number for evaporator assy which comes not with plenum assy.391.00 quoted it lists for 610.00. does any one know any online dealers that are cheaper. i appreciate any help or imformation