Bronco ii questions

Okay first I did search, no luck, I want to get a good amount of flex from my bronco ii mainly the rear, swapping in a 8.8, and want to run 33s, thinking I need six inches of lift but I want flex still, what has everybody else done, going to sas The front later so it will sit with a rake in the rear till then but only want to mess with the rear end once

I run an explorer pack with the eye cut off and my broncoII main leaf on top, that and my shackle redesign got me 4" of lift and I score around 875 on a 30deg ramp.

Any pics

Here are some pics of my shackle hangers. I don't have any pics of it at new ride height. I was about 2" of lift but I wanted more clearance at the frame. So I changed up that shackle mount in the rear and my front I have adjustable coil mounts, so I can lift my rig in 3/4" increments. Check out my build thread for more pics

Can you run 33s uncut?

No, I ran 31's at stock height but had to trim a little bit up front. You can negate the trimming by doing a 2" body lift. You can run 33's stock height if you trim the flare out of the front fender.