lnstevens1976
New Member
- Joined
- November 17, 2007
- Messages
- 7
- Reaction score
- 0
- City, State
- Boise, ID
- Year, Model & Trim Level
- '92 Explorer Eddie Bauer
Does anyone have a wiring diagram for the 4x4 Switch in a '92 Explorer?
After installing a new stereo last night (rig didn't come with one when I bought it) I found that I had bumped the 4x4 switch and could get into 4 high (tested).
I couldn't get into 4 Low though and after a bit it stopped working again.
After further inspection upon pressing any button on the switch nothing happens, no click underneath, etc..
I have tested to make sure there is power at the connection, but I don't know what I can jumper to cause it to go into 4 High, Low, or if I even can.
So any help here would be appreciated.
I would rather not buy a switch only to find out it wasn't the switch.
Thanks,
Larry
After installing a new stereo last night (rig didn't come with one when I bought it) I found that I had bumped the 4x4 switch and could get into 4 high (tested).
I couldn't get into 4 Low though and after a bit it stopped working again.
After further inspection upon pressing any button on the switch nothing happens, no click underneath, etc..
I have tested to make sure there is power at the connection, but I don't know what I can jumper to cause it to go into 4 High, Low, or if I even can.
So any help here would be appreciated.
I would rather not buy a switch only to find out it wasn't the switch.
Thanks,
Larry