- Joined
- December 18, 2005
- Messages
- 5,155
- Reaction score
- 157
- Location
- Liverpool
- City, State
- UK
- Year, Model & Trim Level
- 97 UK XLT, 99 Sport V8,
I'm nearly finished with the V8 swap, now, I've searched the forum for wiring diagrams and come up short...
I have checked all my ground/earth points and they all seem fine..
What I now have is no oil pressure on the gauge, which is causing the red "check gage" light on the dashboard..
It won't pass a safety with that light on...
so.. I need to find out, what wires on the engine harness are for the signal from the oil pressure switch on the following
2000 5.0 V8 engine wiring
2000 4.0 SOHC V6 Engine bay wiring
my intention is to bridge the wires across the big black plug in the engine bay as I'm sure this is where the wiring problem is
Thanks
Si
I have checked all my ground/earth points and they all seem fine..
What I now have is no oil pressure on the gauge, which is causing the red "check gage" light on the dashboard..
It won't pass a safety with that light on...
so.. I need to find out, what wires on the engine harness are for the signal from the oil pressure switch on the following
2000 5.0 V8 engine wiring
2000 4.0 SOHC V6 Engine bay wiring
my intention is to bridge the wires across the big black plug in the engine bay as I'm sure this is where the wiring problem is
Thanks
Si