torsion bars

thorboy44 · 07-02-2005, 03:54 PM

I have an 02 ranger fx4 and i would like to level the front end by adjusting my torsion bars but am not sure exactly how to do it or if it will put my drive shaft/ half-shafts at too great of an angle. I have a shop with a lift so all i need to know it the basics like what tools to use and what precautions to take. thank you

K-9Search · 07-02-2005, 05:20 PM

Hi,
Before ya get yelled at, check in the suspension section and you will see torsion bars 101, that should give you all the info you need, step by step, I think the Ranger is the same as the explorer. good luck and Welcome,
Sandy

07-02-2005, 03:54 PM	#1
thorboy44 Wannabe Elite Explorer St. John Indiana 02 fx4 Join Date: Jul 2005 Posts: 1 Vehicle Specs (Original Poster)	torsion bars I have an 02 ranger fx4 and i would like to level the front end by adjusting my torsion bars but am not sure exactly how to do it or if it will put my drive shaft/ half-shafts at too great of an angle. I have a shop with a lift so all i need to know it the basics like what tools to use and what precautions to take. thank you

07-02-2005, 05:20 PM	#2
K-9Search Wannabe Elite Explorer Sicklerville, New jersey 2001 Sport Join Date: Sep 2004 Posts: 49 Vehicle Specs	Hi, Before ya get yelled at, check in the suspension section and you will see torsion bars 101, that should give you all the info you need, step by step, I think the Ranger is the same as the explorer. good luck and Welcome, Sandy __________________ 2001 Xplorer Sport 20" forte, clear corners, SS speed grill, crystal eyes tail lights....................more to come!!!! http://www.cardomain.com/memberpage/693631