bronco transfer..

fischerry · 08-15-2007, 08:31 PM

alright i have a question,i want to change my shifter motor on the b2.i was told that the shifter motor on the 1st gen explorers and 91-94 ranger's is the exact same as the bronco II's?. will the whole transfer case bolt up? this is the 91 ranger's.

my truck and the ranger are both push button.the harness is the exact same.
the reason for the swap is my 4low does'nt engage.and the tcase was easily aquired.

410Fortune · 08-15-2007, 10:28 PM

it will almost bolt in the front output yoke for the d shaft is different

the shift motor should interchange

you have a 1350 transfer case you are looking at installing a 1354 transfer case, try a search

fischerry · 08-16-2007, 05:51 AM

i did i found the rebuild thread and i took mine apart saturday but i couldnt find anything wrong,besides the fact that the male and femalee adapters in the harness are crap.the shifter motor brakets look a little diffrent though.

08-15-2007, 08:31 PM	#1
fischerry Wannabe Elite Explorer THE SOUTH 92 x'sploda Join Date: Oct 2006 Posts: 312 Vehicle Specs (Original Poster)	bronco transfer.. alright i have a question,i want to change my shifter motor on the b2.i was told that the shifter motor on the 1st gen explorers and 91-94 ranger's is the exact same as the bronco II's?. will the whole transfer case bolt up? this is the 91 ranger's. my truck and the ranger are both push button.the harness is the exact same. the reason for the swap is my 4low does'nt engage.and the tcase was easily aquired. __________________ TRIK Southern RockCrawlers http://s134.photobucket.com/albums/q94/fischerry/ "2nd place,is just the first loser" 88 bII on d35s,8.8 4.0 the good ol' 4.56's. sittin fat on 35" pc at's Last edited by fischerry; 08-15-2007 at 08:32 PM. Reason: pics prob

08-15-2007, 10:28 PM	#2
410Fortune ELITE BRONCO2ERER Crawlorado B2 Mod Join Date: Aug 2000 Posts: 22,099 Vehicle Specs	it will almost bolt in the front output yoke for the d shaft is different the shift motor should interchange you have a 1350 transfer case you are looking at installing a 1354 transfer case, try a search __________________ 96 Explorer daily driver build-1996 XLT 5.0L AWD to 4x4 conversion complete on 33's 88 BII 5.0L conversion - BII 5.0l drivetrain thread My Bronco II - 1988 Bronco II 4x4 V8 on 35's - registry and updates Wifes 07 FJ build - 2007 FJ cruiser locked and lifted

08-16-2007, 05:51 AM	#3
fischerry Wannabe Elite Explorer THE SOUTH 92 x'sploda Join Date: Oct 2006 Posts: 312 Vehicle Specs (Original Poster)	i did i found the rebuild thread and i took mine apart saturday but i couldnt find anything wrong,besides the fact that the male and femalee adapters in the harness are crap.the shifter motor brakets look a little diffrent though. __________________ TRIK Southern RockCrawlers http://s134.photobucket.com/albums/q94/fischerry/ "2nd place,is just the first loser" 88 bII on d35s,8.8 4.0 the good ol' 4.56's. sittin fat on 35" pc at's