6" Closer to GOD

01slvrsprt · 05-31-2008, 01:34 PM

OK, I want to start by thanking everyone that has helped me out with the the planning of this project.....

http://www.explorerforum.com/forums/...d.php?t=212434

Everyone in that thread was a big help. Thanks again.
I also have to thank my 2 friends Mike and Josh for helping me with the lift, I couldnt have done it without you.

So here is what the plan was:
Starting w/bone stock 2001 Ford Explorer Sport add 3" lift kit, PA70023. Replace the stock shackles w/WAR-153 and give the front alittle TT, 1.5" to match the lift from the schackles. Then throw on some Dick Cepek DC-1 w/some BF Goodrich Mud Terrain 33x12.5x15 treads. I also did alittle customizing to the paint scheme which you'll find out in the finished pictures, think of it as alittle suprise

I had to do a few other things while it was in the air, change upper control arm and ball joint, lower ball joint, change the trans filter and gasket and I figured Id change the oil while I was at it.

The first pic is how she started out.
The first thing I did was remove all the ground effects, ALL of them. Now why would I do that?

01slvrsprt · 05-31-2008, 01:51 PM

After all the ground effects where off I changed the ball joints, control arms, did the TT, change the trans pan and the oil. O by the way the only filters that ever go on my vehicles are WIX. Nothin but the best!

O ya, thats my friend Josh, thats whose shop were using, telling me im #1 while im doing the TT. What a friend, lol.

01slvrsprt · 05-31-2008, 02:07 PM

All right, time for the good stuff. Lifting time! Well first we have to disconnect some things. Let me rephrase that, A LOT OF THINGS!

The first pic is Josh taking care of the parking brake cable that didnt want to come off, but Josh being the MacGyver that he is got it w/o breakin a sweat.
In the next im taking apart the int, and you can see out mascot dog, Shelby. Named after the one and only Carroll Shelby. Me n Josh are little into Ford. haha. Then weve got a pic of the int after it has been gutted. And then Mike and I geting one of the frame bolts out. Now Mike isnt a ford guy, but I wont go any further w/that. Lets just say he has Cracked Heads Every Valve Rattles Oil Leaks Every Time

You can see in the bottom right pic that saftey is my #1 priority. Im wearing saftey glasses, ON MY FORE HEAD! Dont make that same mistake, I paid for it. Take that one extra step and put the glasses where they are supposed to be.

01slvrsprt · 05-31-2008, 02:22 PM

Now we didnt get any pics while we were putting the blocks in, opps. My bad. But here is a few of torquing down the new bolts and adjusting the radiator. I also snapped a pic of our consumables for the weekend. We ate really healthy, huh?

01slvrsprt · 05-31-2008, 02:30 PM

OK so once the lift was done, the only thing left were the shackles. And a pic of the new ride height, minus the rims and rubber.

I never realized how dirty the back of my head was until I looked at those 2 pics! I swear I do have running water at my house!

Nytroman · 05-31-2008, 02:40 PM

damn sweet!

01slvrsprt · 05-31-2008, 02:40 PM

The rest of that nite was spent putting the ground effects back on, finding out that they have to be trimmed. And putting the wheels on the X. Here is your first clue on why I took of all the ground effects. Is it enough for you to figure it out? The first 2 are my make shift bumper that I used for 5 days so I wouldnt get in any trouble w/the law.

01slvrsprt · 05-31-2008, 02:54 PM

And the finished product:

The first is how she started the second, well, Im sure can figure that out.

01slvrsprt · 05-31-2008, 03:00 PM

Heres a few more. SUPRISE!!!!

Thanks again to all that helped out in any way shape or form. I def think it turned out awsome,especially the black paint, for a rattle can job. Let me know what you think, all types of feed back are welcome.

*Bruces expo* · 05-31-2008, 03:32 PM

sweet rig man , lovin the two tone !! , do you know were Crystal lake IL is ??

01slvrsprt · 05-31-2008, 03:53 PM

Quote:

Originally Posted by Bruce'sexpo

sweet rig man , lovin the two tone !! , do you know were Crystal lake IL is ??

Thanx. Ya I do. I have family in McHenry

*Bruces expo* · 05-31-2008, 04:04 PM

kool , most of my family live's around that area , but im from GA , but i live in crystal lake now , but at the moment my rig is still in ga ,so when i get more time , and money im going back down there to pick it up !!

*Dre* · 05-31-2008, 04:06 PM

Those DC-1 rims look so sweet on your rig... congrats!

*Blacksheep Josh* · 05-31-2008, 04:31 PM

Quote:

Originally Posted by 01slvrsprt

Heres a few more. SUPRISE!!!!

Thanks again to all that helped out in any way shape or form. I def think it turned out awsome,especially the black paint, for a rattle can job. Let me know what you think, all types of feed back are welcome.

This is EXACTLY what I would want my X to look like if I had that style Explorer.

Good job man, be proud. Not many people can do EVERYTHING at once. So what's next?

*mynameisaric* · 05-31-2008, 04:39 PM

need to get some scratches in that pretty paint. Looking good though. my mom has the same truck, but it looks like your first picture and my dad wont let her lift it or go oversized with the tires. I think i'm going to try and buy it when she is done with it years from now. i like the styling of the 3rd gen sports.

i especially like what you did with the tupperware. looks really good.

trj360 · 05-31-2008, 04:54 PM

Quote:

Originally Posted by IZwack

Mr Reznor shares your ideas:

http://youtube.com/watch?v=QWncI51ggH8

He wants to have sex with cars??

Anyway, great looking truck.

jenren81 · 05-31-2008, 08:02 PM

look siiick!!!!! i love the black trim..... i was so going to do that to mine. and nice choice on the mud terrains, i wish i would've gotten those sometimes. doesn't it feel so much better to ride in now ;-)

*Blacksheep Josh* · 05-31-2008, 09:11 PM

Yeah, when I paint my 1st gen, I'm going to paint the lower area on the sides black to kind of mimic what he has going on.

**IZwack** · 05-31-2008, 09:18 PM

Hehehe -- sorry had to delete the youtube video. I was not aware it was the 'unsafe' version

01slvrsprt · 06-01-2008, 11:59 AM

Quote:

Originally Posted by Dre

Those DC-1 rims look so sweet on your rig... congrats!

Thanx man, I thank wakskatr8 b/c I got to see them on hers.

Quote:

Originally Posted by blacksheep josh

This is EXACTLY what I would want my X to look like if I had that style Explorer.

Good job man, be proud. Not many people can do EVERYTHING at once. So what's next?

The only reason I was able to do it all at once was b/c of the 3-day holiday weekend and it took ALL weekend. Looking back at it know, I wish I would have done the front end work prior. You never know what kind of problems you're going to run into working with the BL.

As far as whats next, im planning on putting on a bull bar w/a winch, a roof rack w/kc lights and next summer prob putting a 4" Superlift on it. But, I just found out yest that I have 3:73 with open axels so that may take priority over everything else. Well see.......

Quote:

Originally Posted by mynameisaric

need to get some scratches in that pretty paint. Looking good though. my mom has the same truck, but it looks like your first picture and my dad wont let her lift it or go oversized with the tires. I think i'm going to try and buy it when she is done with it years from now. i like the styling of the 3rd gen sports.

i especially like what you did with the tupperware. looks really good.

Thanx Aric, Im ready to start taking it trailing. Im hoping to make next weekend but right now that tourney that im in is first on the list. But, even if I dont make that, let me know whenever theres a group goin to the Cliffs. I wanted to get her dirty, the scratches im not so excited about

05-31-2008, 01:51 PM	#2
01slvrsprt Wannabe Elite Explorer South Burbs of Chicago '01 Sport Join Date: Apr 2008 Posts: 166 Vehicle Specs (Original Poster)	After all the ground effects where off I changed the ball joints, control arms, did the TT, change the trans pan and the oil. O by the way the only filters that ever go on my vehicles are WIX. Nothin but the best! O ya, thats my friend Josh, thats whose shop were using, telling me im #1 while im doing the TT. What a friend, lol. Attached Images __________________ 01 Xplr Sport 4x4.....I bleed blue..... 6" Closer to GOD 3" BL, TT, WAR-153 Shackles Dick Cepek Black 15x8 DC-1 Rims 33"x12.5" BF Goodrich Mud Terrain

05-31-2008, 02:07 PM	#3
01slvrsprt Wannabe Elite Explorer South Burbs of Chicago '01 Sport Join Date: Apr 2008 Posts: 166 Vehicle Specs (Original Poster)	All right, time for the good stuff. Lifting time! Well first we have to disconnect some things. Let me rephrase that, A LOT OF THINGS! The first pic is Josh taking care of the parking brake cable that didnt want to come off, but Josh being the MacGyver that he is got it w/o breakin a sweat. In the next im taking apart the int, and you can see out mascot dog, Shelby. Named after the one and only Carroll Shelby. Me n Josh are little into Ford. haha. Then weve got a pic of the int after it has been gutted. And then Mike and I geting one of the frame bolts out. Now Mike isnt a ford guy, but I wont go any further w/that. Lets just say he has Cracked Heads Every Valve Rattles Oil Leaks Every Time You can see in the bottom right pic that saftey is my #1 priority. Im wearing saftey glasses, ON MY FORE HEAD! Dont make that same mistake, I paid for it. Take that one extra step and put the glasses where they are supposed to be. Attached Images __________________ 01 Xplr Sport 4x4.....I bleed blue..... 6" Closer to GOD 3" BL, TT, WAR-153 Shackles Dick Cepek Black 15x8 DC-1 Rims 33"x12.5" BF Goodrich Mud Terrain Last edited by 01slvrsprt; 05-31-2008 at 03:03 PM. Reason: Add Text

05-31-2008, 02:22 PM	#4
01slvrsprt Wannabe Elite Explorer South Burbs of Chicago '01 Sport Join Date: Apr 2008 Posts: 166 Vehicle Specs (Original Poster)	Now we didnt get any pics while we were putting the blocks in, opps. My bad. But here is a few of torquing down the new bolts and adjusting the radiator. I also snapped a pic of our consumables for the weekend. We ate really healthy, huh? Attached Images __________________ 01 Xplr Sport 4x4.....I bleed blue..... 6" Closer to GOD 3" BL, TT, WAR-153 Shackles Dick Cepek Black 15x8 DC-1 Rims 33"x12.5" BF Goodrich Mud Terrain

05-31-2008, 02:30 PM	#5
01slvrsprt Wannabe Elite Explorer South Burbs of Chicago '01 Sport Join Date: Apr 2008 Posts: 166 Vehicle Specs (Original Poster)	OK so once the lift was done, the only thing left were the shackles. And a pic of the new ride height, minus the rims and rubber. I never realized how dirty the back of my head was until I looked at those 2 pics! I swear I do have running water at my house! Attached Images __________________ 01 Xplr Sport 4x4.....I bleed blue..... 6" Closer to GOD 3" BL, TT, WAR-153 Shackles Dick Cepek Black 15x8 DC-1 Rims 33"x12.5" BF Goodrich Mud Terrain

05-31-2008, 02:40 PM	#6
Nytroman Wannabe Elite Explorer Lackawanna, New york 04 XLT 4.6L Join Date: May 2008 Posts: 99 Vehicle Specs	damn sweet! __________________ My Truck - http://www.cardomain.com/ride/3080567

05-31-2008, 01:34 PM	#1
01slvrsprt Wannabe Elite Explorer South Burbs of Chicago '01 Sport Join Date: Apr 2008 Posts: 166 Vehicle Specs (Original Poster)	6" Closer to GOD OK, I want to start by thanking everyone that has helped me out with the the planning of this project..... http://www.explorerforum.com/forums/...d.php?t=212434 Everyone in that thread was a big help. Thanks again. I also have to thank my 2 friends Mike and Josh for helping me with the lift, I couldnt have done it without you. So here is what the plan was: Starting w/bone stock 2001 Ford Explorer Sport add 3" lift kit, PA70023. Replace the stock shackles w/WAR-153 and give the front alittle TT, 1.5" to match the lift from the schackles. Then throw on some Dick Cepek DC-1 w/some BF Goodrich Mud Terrain 33x12.5x15 treads. I also did alittle customizing to the paint scheme which you'll find out in the finished pictures, think of it as alittle suprise I had to do a few other things while it was in the air, change upper control arm and ball joint, lower ball joint, change the trans filter and gasket and I figured Id change the oil while I was at it. The first pic is how she started out. The first thing I did was remove all the ground effects, ALL of them. Now why would I do that? Attached Images __________________ 01 Xplr Sport 4x4.....I bleed blue..... 6" Closer to GOD 3" BL, TT, WAR-153 Shackles Dick Cepek Black 15x8 DC-1 Rims 33"x12.5" BF Goodrich Mud Terrain Last edited by 01slvrsprt; 05-31-2008 at 01:37 PM. Reason: Add pic

05-31-2008, 02:54 PM	#8
01slvrsprt Wannabe Elite Explorer South Burbs of Chicago '01 Sport Join Date: Apr 2008 Posts: 166 Vehicle Specs (Original Poster)	And the finished product: The first is how she started the second, well, Im sure can figure that out. Attached Images __________________ 01 Xplr Sport 4x4.....I bleed blue..... 6" Closer to GOD 3" BL, TT, WAR-153 Shackles Dick Cepek Black 15x8 DC-1 Rims 33"x12.5" BF Goodrich Mud Terrain

05-31-2008, 03:00 PM	#9
01slvrsprt Wannabe Elite Explorer South Burbs of Chicago '01 Sport Join Date: Apr 2008 Posts: 166 Vehicle Specs (Original Poster)	Heres a few more. SUPRISE!!!! Thanks again to all that helped out in any way shape or form. I def think it turned out awsome,especially the black paint, for a rattle can job. Let me know what you think, all types of feed back are welcome. Attached Images __________________ 01 Xplr Sport 4x4.....I bleed blue..... 6" Closer to GOD 3" BL, TT, WAR-153 Shackles Dick Cepek Black 15x8 DC-1 Rims 33"x12.5" BF Goodrich Mud Terrain

05-31-2008, 03:32 PM	#10
Bruces expo Elite Explorer Middle GA 91 Mazda Navajo Join Date: Jan 2005 Posts: 1,754 Vehicle Specs	sweet rig man , lovin the two tone !! , do you know were Crystal lake IL is ?? __________________ 1999-Exdpedition Xlt 4.6 Silver-Grey- OIL LEAKING .haha ZAPV#161, 91 Navajo, 3" Bodylift , 2.5"skyjacker coils,skyjacker shocks , 2" ext shackels, . home made CAI.no muffler's straight cat's ,warn locking hub's,throttle cable mod ,deleted rear swaybar , front sway bar disco's ,custom cut front bumper ,deleted front fender flare's ,clear turn's ,clear tail's,33" Pro Comp AT's 1953 Ford F-100 Restoration Project

05-31-2008, 04:04 PM	#12
Bruces expo Elite Explorer Middle GA 91 Mazda Navajo Join Date: Jan 2005 Posts: 1,754 Vehicle Specs	kool , most of my family live's around that area , but im from GA , but i live in crystal lake now , but at the moment my rig is still in ga ,so when i get more time , and money im going back down there to pick it up !! __________________ 1999-Exdpedition Xlt 4.6 Silver-Grey- OIL LEAKING .haha ZAPV#161, 91 Navajo, 3" Bodylift , 2.5"skyjacker coils,skyjacker shocks , 2" ext shackels, . home made CAI.no muffler's straight cat's ,warn locking hub's,throttle cable mod ,deleted rear swaybar , front sway bar disco's ,custom cut front bumper ,deleted front fender flare's ,clear turn's ,clear tail's,33" Pro Comp AT's 1953 Ford F-100 Restoration Project

05-31-2008, 04:06 PM	#13
Dre Elite Explorer Chicago 94 Limited Join Date: May 1999 Posts: 4,822 Vehicle Specs	Those DC-1 rims look so sweet on your rig... congrats! __________________ 4x4 Werks by Dre My Gallery

05-31-2008, 04:39 PM	#15
mynameisaric with an A Bolingbrook, IL 98 XLT Join Date: Jan 2004 Posts: 1,814 Vehicle Specs	need to get some scratches in that pretty paint. Looking good though. my mom has the same truck, but it looks like your first picture and my dad wont let her lift it or go oversized with the tires. I think i'm going to try and buy it when she is done with it years from now. i like the styling of the 3rd gen sports. i especially like what you did with the tupperware. looks really good. __________________ -Driveway Ornament (aka 98 explorer) -05 F150 3V 5.4L Supercab

05-31-2008, 08:02 PM	#17
jenren81 Wannabe Elite Explorer Frisco, CO '03 Sport 4x4 Join Date: Feb 2005 Posts: 434 Vehicle Specs	look siiick!!!!! i love the black trim..... i was so going to do that to mine. and nice choice on the mud terrains, i wish i would've gotten those sometimes. doesn't it feel so much better to ride in now ;-) __________________ Jenni my xploder

05-31-2008, 09:11 PM	#18
Blacksheep Josh Slinky+Escalator=Fun Statesboro, GA 1993 Ford Explorer XLT Join Date: Jul 2006 Posts: 3,566 Vehicle Specs	Yeah, when I paint my 1st gen, I'm going to paint the lower area on the sides black to kind of mimic what he has going on. __________________ "Thunder" Registry R.I.P. 2005-2012 2001 Ford Ranger (New!!) "You can hear me when I'm coming" - Yung Joc

05-31-2008, 09:18 PM	#19
IZwack Germantown, MD Join Date: Feb 2003 Posts: 22,390 Vehicle Specs	Hehehe -- sorry had to delete the youtube video. I was not aware it was the 'unsafe' version __________________ »»»»»...how'd the moon get there, how'd the moon get there?