3rd gen pic's

*Limited02* · 01-27-2010, 06:15 PM

Quote:

Originally Posted by $ilent$eal

You are going to need a bigger picture than that

$ilent$eal · 01-27-2010, 06:41 PM

Quote:

Originally Posted by Limited02

You are going to need a bigger picture than that

Whoops, lemme try that again!

$ilent$eal · 01-27-2010, 06:51 PM

*Limited02* · 01-27-2010, 08:20 PM

That's better

Hard to tell, but do you have a grill or what? Ride looks good and you keep it clean!

$ilent$eal · 01-27-2010, 09:23 PM

Quote:

Originally Posted by Limited02

That's better

Hard to tell, but do you have a grill or what? Ride looks good and you keep it clean!

Thanks! It is a work in progress, but whose isin't, lol. And yea there is a grill there, it's just pitch black (billet wide fin).

JarvisB · 01-28-2010, 01:40 PM

Quote:

Originally Posted by 1Bad04

Since these pictures were taken, I've done the FX-R projector retrofit, removed the reflectors from the bumper (I had clear tails at one time), and spaced the lower grill out to be more flush with the bumper.

nice explorer you got there, we got some same mods lol.

May I ask what size tires are you running? I like the look of it and how it fills the wheel well.

1Bad04 · 01-28-2010, 02:10 PM

Thanks. Yours looks good too. The tires are 275/45's. Can't wait to see yours with the winter rims.

jrfarve · 01-28-2010, 02:46 PM

were did you get your headlights? they look sick!

$ilent$eal · 01-28-2010, 02:59 PM

1Bad04

Yo, where did you get your magnaflow high flow cats? I looked around and could only find direct OE replacement (Magnaflow #93111)?

***EDIT***

nm I figured it out, why cant they just say high flow y-pipe blah blah, lol.

1Bad04 · 01-28-2010, 03:17 PM

I got the cats/y-pipe from www.wundercarparts.com. Part #93108. I'm pretty sure they used to be cheaper than they are now.

The headlights are from Ebay.

zerodevil · 01-28-2010, 03:29 PM

bad, youve done pretty much everything to ur truck ive done to mine, your like my doppleganger lol.

$ilent$eal · 01-28-2010, 03:44 PM

Quote:

Originally Posted by 1Bad04

I got the cats/y-pipe from www.wundercarparts.com. Part #93108. I'm pretty sure they used to be cheaper than they are now.

The headlights are from Ebay.

I was looking at your url there and was looking at my v6 setup. $500. Eh, went to etrailer.com and grabbed me a set for $440 free ship, lol!

Now I really cant wait till next month, X-CHARGER!!!

JarvisB · 01-28-2010, 08:24 PM

Quote:

Originally Posted by 1Bad04

Thanks. Yours looks good too. The tires are 275/45's. Can't wait to see yours with the winter rims.

wow your set up fills the wheel well better than others that are running 275/45

I was sort of thinking about getting 265/50 tires since they are a tad bit bigger and I thought it would fill in the wheel well better than 275/45

But I guess I am wrong since I like how your set looks-and I already got ground force springs at my home, just need to get myself a set of camber adjusters and then I will have them installed.

*Limited02* · 01-28-2010, 08:52 PM

Quote:

Originally Posted by JarvisB

wow your set up fills the wheel well better than others that are running 275/45

I was sort of thinking about getting 265/50 tires since they are a tad bit bigger and I thought it would fill in the wheel well better than 275/45

But I guess I am wrong since I like how your set looks-and I already got ground force springs at my home, just need to get myself a set of camber adjusters and then I will have them installed.

Mostly because he is lowered

Zerodevil- I'm still the fastest 3rd gen until you or 1bad04 make a run for it

JarvisB · 01-28-2010, 08:58 PM

Quote:

Originally Posted by Limited02

Mostly because he is lowered

Zerodevil- I'm still the fastest 3rd gen until you or 1bad04 make a run for it

Yeah thats probably why.

I guess if thats the case, I ll just go with 275/45 cuz I am going to lower mine as well.

Ever consider about lowering your x? i think it would look good

ryanpetit · 02-08-2010, 01:14 PM

Here are some of mine,

Since these were taken, someone rear ended me. Just got the car back with a new rear end and no split in the rear panel...wahoo!

*Limited02* · 02-09-2010, 06:51 PM

Ryan-We need to talk about some wheels, grill change and removing the roof rack

Your ride looks great and I wish someone would rear end me so I can get the bumper and cracked panel fixed

*Limited02* · 02-09-2010, 06:53 PM

Quote:

Originally Posted by JarvisB

Yeah thats probably why.

I guess if thats the case, I ll just go with 275/45 cuz I am going to lower mine as well.

Ever consider about lowering your x? i think it would look good

I do plan on lowering it once funds allow

ryanpetit · 02-09-2010, 07:01 PM

Quote:

Originally Posted by Limited02

Ryan-We need to talk about some wheels, grill change and removing the roof rack

Your ride looks great and I wish someone would rear end me so I can get the bumper and cracked panel fixed

I was thinking about some wheels, got any recommendations? Wasn't too sure about a grill change, not keen on the billet ones. Was thinking about throwing a EB chrome on there and seeing how it looks....

*Limited02* · 02-09-2010, 07:11 PM

Before I answer that, are you going for a street look or lifting it?

If anything, try painting your grill gloss black like I did. I am liking the looks of gonzmexican and may be coping him for the most part. (grill and lights)

01-27-2010, 08:20 PM	#244
Limited02 Wanna Race? Gardner, KS '02 Limited V8 Join Date: Nov 2006 Posts: 3,087 Vehicle Specs	That's better Hard to tell, but do you have a grill or what? Ride looks good and you keep it clean! __________________ "Spending money I don't have, on parts I don't need, to impress people I don't know" 2002 4.6 4x4, K&N CAI, Henson tuned, FM70 and 20" Boss 306's My Built-in Cabinet EXPLORER FORUM LICENSE PLATE FRAMES!!!

01-28-2010, 02:10 PM	#247
1Bad04 Wannabe Elite Explorer Mineral Wells, WV '04 XLT Sport Join Date: May 2007 Posts: 83 Vehicle Specs	Thanks. Yours looks good too. The tires are 275/45's. Can't wait to see yours with the winter rims. __________________ '04 Explorer XLT Sport 4x4 V8 Lowered w/ GF springs on 20" Boss 335's, Eibach front & rear sway bars, Powerslot Cryo's with Hawk pads, FX-R projector retrofit/5000K HIDs/LED tails, stainless grills & step bars, K&N intake/JBA headers/Magnaflow hi-flow cats and Magnapack muffler/ASP UD Pulleys/GMS Hot Street coil packs/E-fan/X3 Tuned by Henson

01-28-2010, 03:17 PM	#250
1Bad04 Wannabe Elite Explorer Mineral Wells, WV '04 XLT Sport Join Date: May 2007 Posts: 83 Vehicle Specs	I got the cats/y-pipe from www.wundercarparts.com. Part #93108. I'm pretty sure they used to be cheaper than they are now. The headlights are from Ebay. __________________ '04 Explorer XLT Sport 4x4 V8 Lowered w/ GF springs on 20" Boss 335's, Eibach front & rear sway bars, Powerslot Cryo's with Hawk pads, FX-R projector retrofit/5000K HIDs/LED tails, stainless grills & step bars, K&N intake/JBA headers/Magnaflow hi-flow cats and Magnapack muffler/ASP UD Pulleys/GMS Hot Street coil packs/E-fan/X3 Tuned by Henson

02-09-2010, 06:51 PM	#257
Limited02 Wanna Race? Gardner, KS '02 Limited V8 Join Date: Nov 2006 Posts: 3,087 Vehicle Specs	Ryan-We need to talk about some wheels, grill change and removing the roof rack Your ride looks great and I wish someone would rear end me so I can get the bumper and cracked panel fixed __________________ "Spending money I don't have, on parts I don't need, to impress people I don't know" 2002 4.6 4x4, K&N CAI, Henson tuned, FM70 and 20" Boss 306's My Built-in Cabinet EXPLORER FORUM LICENSE PLATE FRAMES!!!

02-09-2010, 07:11 PM	#260
Limited02 Wanna Race? Gardner, KS '02 Limited V8 Join Date: Nov 2006 Posts: 3,087 Vehicle Specs	Before I answer that, are you going for a street look or lifting it? If anything, try painting your grill gloss black like I did. I am liking the looks of gonzmexican and may be coping him for the most part. (grill and lights) __________________ "Spending money I don't have, on parts I don't need, to impress people I don't know" 2002 4.6 4x4, K&N CAI, Henson tuned, FM70 and 20" Boss 306's My Built-in Cabinet EXPLORER FORUM LICENSE PLATE FRAMES!!!

01-27-2010, 06:51 PM	#243
$ilent$eal Wannabe Elite Explorer Everett Wa 2005 XLT Join Date: Sep 2009 Posts: 76 Vehicle Specs

01-28-2010, 02:46 PM	#248
jrfarve Wannabe Elite Explorer Tacoma, WA 02 Ford Explorer XLT Join Date: Jan 2010 Posts: 26 Vehicle Specs	were did you get your headlights? they look sick!

01-28-2010, 02:59 PM	#249
$ilent$eal Wannabe Elite Explorer Everett Wa 2005 XLT Join Date: Sep 2009 Posts: 76 Vehicle Specs	1Bad04 Yo, where did you get your magnaflow high flow cats? I looked around and could only find direct OE replacement (Magnaflow #93111)? *EDIT* nm I figured it out, why cant they just say high flow y-pipe blah blah, lol.

01-28-2010, 03:29 PM	#251
zerodevil Wannabe Elite Explorer Anchorage, AK 2003 XLT V8. Join Date: Mar 2008 Posts: 1,328 Vehicle Specs	bad, youve done pretty much everything to ur truck ive done to mine, your like my doppleganger lol.

02-08-2010, 01:14 PM	#256
ryanpetit Wannabe Elite Explorer Springfield, NJ 2002 XLT Join Date: Feb 2010 Posts: 15 Vehicle Specs	Here are some of mine, Since these were taken, someone rear ended me. Just got the car back with a new rear end and no split in the rear panel...wahoo!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New 3rd Gen Pic thread - now closed	MCD04EB	Modified 2002 - 2005 Explorers	20	02-21-2012 07:25 PM
3rd Gen Rear Seat Question, pics please	black91EB	Modified 2002 - 2005 Explorers	5	04-27-2011 06:43 PM
Diff between 3rd gen v8 and 4th gen v8 engines?	rama1200	Modified 2002 - 2005 Explorers	23	01-01-2008 07:30 PM
Why does my 3rd gen sag (pics)	hawks06	Stock 2002 - 2005 Explorers	15	11-17-2006 08:07 AM