5.0L 2WD Driveshaft Length

*Spdrcer34* · 06-09-2009, 09:55 PM

I need to know the length of the stock driveshaft, from U-joint to U-joint (Center to Center).

1996-2001 Ford Explorer/Mercury Mountaineer 2WD 5.0L

I bought one, and it doesn't have the right Slip-yoke on it. So I am wondering what it is that I have. If the LENGTH is correct, I can just buy a new Slip Yoke. Those are only like $30.....but if it's the wrong length AND it's the wrong Slip Yoke, it's gotta go back.

Ryan

Cobraguy · 06-10-2009, 07:49 AM

I need to know this too! I can tell you the distance on a 4WD shaft with a 4406 is 35.5 inches! I know...what the hell good is that...

*Spdrcer34* · 06-10-2009, 11:19 AM

LOL..

I have a 2WD 4.0L/M5OD-R1 driveline, and a AWD 5.0L/4404 driveline sitting here....and this other driveline that I bought, but isnt't the right one...

Ryan

*Spdrcer34* · 06-11-2009, 01:15 AM

The driveshaft I recieved is 51".

I know it's not a Mustang driveshaft, but I think it's a Explorer V-6 Driveshaft.

Thanks,
Ryan

*Spdrcer34* · 06-15-2009, 07:47 PM

TTT

Ryan

*Spdrcer34* · 06-17-2009, 04:58 PM

Just for future reference: 52.5" is the length of the driveshaft from a 1996 to 2001 5.0L/4R70W 2WD Explorer.

Ryan

06-09-2009, 09:55 PM	#1
Spdrcer34 Speed Bremerton, WA 1992 Explorer XL Join Date: Mar 2002 Posts: 3,884 Vehicle Specs (Original Poster)	5.0L 2WD Driveshaft Length I need to know the length of the stock driveshaft, from U-joint to U-joint (Center to Center). 1996-2001 Ford Explorer/Mercury Mountaineer 2WD 5.0L I bought one, and it doesn't have the right Slip-yoke on it. So I am wondering what it is that I have. If the LENGTH is correct, I can just buy a new Slip Yoke. Those are only like $30.....but if it's the wrong length AND it's the wrong Slip Yoke, it's gotta go back. Ryan __________________ 1992 Ford Explorer XL - with a few bolt ons...

06-10-2009, 11:19 AM	#3
Spdrcer34 Speed Bremerton, WA 1992 Explorer XL Join Date: Mar 2002 Posts: 3,884 Vehicle Specs (Original Poster)	LOL.. I have a 2WD 4.0L/M5OD-R1 driveline, and a AWD 5.0L/4404 driveline sitting here....and this other driveline that I bought, but isnt't the right one... Ryan __________________ 1992 Ford Explorer XL - with a few bolt ons...

06-11-2009, 01:15 AM	#4
Spdrcer34 Speed Bremerton, WA 1992 Explorer XL Join Date: Mar 2002 Posts: 3,884 Vehicle Specs (Original Poster)	The driveshaft I recieved is 51". I know it's not a Mustang driveshaft, but I think it's a Explorer V-6 Driveshaft. Thanks, Ryan __________________ 1992 Ford Explorer XL - with a few bolt ons...

06-15-2009, 07:47 PM	#5
Spdrcer34 Speed Bremerton, WA 1992 Explorer XL Join Date: Mar 2002 Posts: 3,884 Vehicle Specs (Original Poster)	TTT Ryan __________________ 1992 Ford Explorer XL - with a few bolt ons...

06-17-2009, 04:58 PM	#6
Spdrcer34 Speed Bremerton, WA 1992 Explorer XL Join Date: Mar 2002 Posts: 3,884 Vehicle Specs (Original Poster)	Just for future reference: 52.5" is the length of the driveshaft from a 1996 to 2001 5.0L/4R70W 2WD Explorer. Ryan __________________ 1992 Ford Explorer XL - with a few bolt ons...