a4ld valve body ?'s

jake122288 · 10-21-2009, 05:18 PM

i was just changing the valve body gasket cuz i noticed it was worn and what not and one of the small "L" hooks fell out does anyone have a picture of the valve body for the a4ld with all the small "L" hoops and stops in place and visible?

sofa king shifty · 10-21-2009, 05:48 PM

theres a sticky at the top of this forum-----a4ld valve body rebuild. scroll through till u see wut u need

Jack Flash · 10-21-2009, 06:32 PM

yes, the stickys at the top of this section are the best that I've found !!

,
,

J...trying to avoid work !

sofa king shifty · 10-21-2009, 06:36 PM

me too. gave me the confidence to do this myself.

jake122288 · 10-21-2009, 07:28 PM

Quote:

Originally Posted by sofa king shifty

me too. gave me the confidence to do this myself.

i've actually searched the stickys b4 i posted this and i can not find a picture of even a description of where exactly all the "L" keepers are located on the valve body... i was removing the gasket and one popped out so i cant even go off memory on that i have no problem doing the work or the research but i cant find what i need thus i asked for the additional help via this thread. the stickys are actually what gave me the thought at confidence to actually tear into it and at least check it out lol

sofa king shifty · 10-21-2009, 07:36 PM

give me a few minutes, let me look this up.

sofa king shifty · 10-21-2009, 07:40 PM

i have the instructions from my trans kit, shows everything!!! need ur fax number and i can send it.

sofa king shifty · 10-21-2009, 07:49 PM

actually, go to the a4ld vb rebuild diary sticky at the top of the page, on page 1 it shows a pic of the instructions. look closely and around the perimeter of the vb drawing you will see little circles with an x inside. that is where the L keepers go. if you need a better pic let me know i will fax.

jake122288 · 10-21-2009, 07:53 PM

Quote:

Originally Posted by sofa king shifty

actually, go to the a4ld vb rebuild diary sticky at the top of the page, on page 1 it shows a pic of the instructions. look closely and around the perimeter of the vb drawing you will see little circles with an x inside. that is where the L keepers go. if you need a better pic let me know i will fax.

better pic is needed lol when would be a good time for you to fax a copy to me

sofa king shifty · 10-21-2009, 08:00 PM

just got p.m.

sofa king shifty · 10-21-2009, 08:28 PM

tried to fax, line is busy

jake122288 · 10-21-2009, 08:31 PM

Quote:

Originally Posted by sofa king shifty

tried to fax, line is busy

ok well it shouldnt be busy now lol this phone is always ringing off the hook give it a shot again whenever

sofa king shifty · 10-21-2009, 08:32 PM

trying now

sofa king shifty · 10-21-2009, 08:34 PM

no go.....

jake122288 · 10-21-2009, 08:38 PM

Quote:

Originally Posted by sofa king shifty

no go.....

i sent ya a pm with a diff fax number wow i cant believe ppl can be so unorganized lol

sofa king shifty · 10-21-2009, 08:48 PM

BAM!!!!!!!!!!should be in ur hands by now.

jake122288 · 10-21-2009, 08:48 PM

Quote:

Originally Posted by sofa king shifty

no go.....

whchever number u just used is the right one hahaha now lets just see if this fax machine works and recieves like its supposed to sinc enothing else is going right hahaha

jake122288 · 10-21-2009, 08:50 PM

Quote:

Originally Posted by jake122288

whchever number u just used is the right one hahaha now lets just see if this fax machine works and recieves like its supposed to sinc enothing else is going right hahaha

yay it worked thanks again for being patient this will get what i need done...and like i said sorry for the confusion and wrong numbers and what not hahahaha and thanks a bunch for working with me and helping me here...even tho it was such a pain LOL! and could u PM back which number u used for sure (since i sent ya how many) so i can werite it on the damn thing lol

sofa king shifty · 10-21-2009, 08:57 PM

it was the last one you sent me ending 2558

jake122288 · 10-21-2009, 09:00 PM

Quote:

Originally Posted by sofa king shifty

it was the last one you sent me ending 2558

just a ? now on those instructions are the white slots where the other "rectangular kinda looking" keepers are located?

10-21-2009, 05:18 PM	#1
jake122288 Wannabe Elite Explorer Pleasantville, iowa 1994 4-door xlt 4x4 Join Date: May 2009 Posts: 375 Vehicle Specs (Original Poster)	a4ld valve body ?'s i was just changing the valve body gasket cuz i noticed it was worn and what not and one of the small "L" hooks fell out does anyone have a picture of the valve body for the a4ld with all the small "L" hoops and stops in place and visible?

10-21-2009, 06:32 PM	#3
Jack Flash Wannabe Elite Explorer Ethel, MS (3) '88 BII's, '99 Ranger Join Date: Oct 2007 Posts: 356 Vehicle Specs	yes, the stickys at the top of this section are the best that I've found !! , , J...trying to avoid work ! __________________ Jack of All Trades Retired From Most www.internationalcuemakers.com www.jimboarmy.com Latest Project: '86 Ranger 4X4

10-21-2009, 05:48 PM	#2
sofa king shifty Wannabe Elite Explorer lakeside,ca 1989 Join Date: Oct 2009 Posts: 62 Vehicle Specs	theres a sticky at the top of this forum-----a4ld valve body rebuild. scroll through till u see wut u need

10-21-2009, 06:36 PM	#4
sofa king shifty Wannabe Elite Explorer lakeside,ca 1989 Join Date: Oct 2009 Posts: 62 Vehicle Specs	me too. gave me the confidence to do this myself.

10-21-2009, 07:36 PM	#6
sofa king shifty Wannabe Elite Explorer lakeside,ca 1989 Join Date: Oct 2009 Posts: 62 Vehicle Specs	give me a few minutes, let me look this up.

10-21-2009, 07:40 PM	#7
sofa king shifty Wannabe Elite Explorer lakeside,ca 1989 Join Date: Oct 2009 Posts: 62 Vehicle Specs	i have the instructions from my trans kit, shows everything!!! need ur fax number and i can send it.

10-21-2009, 07:49 PM	#8
sofa king shifty Wannabe Elite Explorer lakeside,ca 1989 Join Date: Oct 2009 Posts: 62 Vehicle Specs	actually, go to the a4ld vb rebuild diary sticky at the top of the page, on page 1 it shows a pic of the instructions. look closely and around the perimeter of the vb drawing you will see little circles with an x inside. that is where the L keepers go. if you need a better pic let me know i will fax.

10-21-2009, 08:00 PM	#10
sofa king shifty Wannabe Elite Explorer lakeside,ca 1989 Join Date: Oct 2009 Posts: 62 Vehicle Specs	just got p.m.

10-21-2009, 08:28 PM	#11
sofa king shifty Wannabe Elite Explorer lakeside,ca 1989 Join Date: Oct 2009 Posts: 62 Vehicle Specs	tried to fax, line is busy

10-21-2009, 08:32 PM	#13
sofa king shifty Wannabe Elite Explorer lakeside,ca 1989 Join Date: Oct 2009 Posts: 62 Vehicle Specs	trying now

10-21-2009, 08:34 PM	#14
sofa king shifty Wannabe Elite Explorer lakeside,ca 1989 Join Date: Oct 2009 Posts: 62 Vehicle Specs	no go.....

10-21-2009, 08:48 PM	#16
sofa king shifty Wannabe Elite Explorer lakeside,ca 1989 Join Date: Oct 2009 Posts: 62 Vehicle Specs	BAM!!!!!!!!!!should be in ur hands by now.

10-21-2009, 08:57 PM	#19
sofa king shifty Wannabe Elite Explorer lakeside,ca 1989 Join Date: Oct 2009 Posts: 62 Vehicle Specs	it was the last one you sent me ending 2558