Parting out 94 Eddie Bauer

walterd140 · 01-16-2011, 06:08 AM

Found one close on Craigslist. Thanks anyway

txng6687 · 01-17-2011, 10:37 PM

How much for the 3 good door panels shipped to 79936?

*Willard* · 01-18-2011, 04:42 PM

Quote:

Originally Posted by txng6687

How much for the 3 good door panels shipped to 79936?

Before I give you a quote, note that the front two door panels no longer have the door pulls in them. They are already sold.

larivera1989 · 01-18-2011, 07:17 PM

how much for the stock HU shipped to 34736

txng6687 · 01-18-2011, 10:56 PM

Quote:

Originally Posted by Willard

Before I give you a quote, note that the front two door panels no longer have the door pulls in them. They are already sold.

Thats ok. I can get the door pulls.

*Willard* · 01-20-2011, 06:10 PM

bumpity

bigbzc · 01-20-2011, 08:21 PM

Hey man, I need both front drive axles. I mean from the wheel all the way into the front diff. The pass side is a 2 peice and the front diff has to be removed to get the E clip out of that axle shaft so it can be removed. You can still put the hubs and rotors and stuff back on after removing the axles so that you can keep it roll-able. If you can get these out of it, how much would you take for them? Email me at bigbzc@yahoo.com

*Willard* · 01-20-2011, 08:31 PM

PM'd

*Willard* · 01-26-2011, 04:25 PM

bump

*FIND* · 01-26-2011, 06:18 PM

Still have the front door panels? I'm looking for the courtesy light lens on the drivers side.

Fray · 01-26-2011, 07:11 PM

Is any of this interchangeable with the '93 XLT?

hunter930 · 01-26-2011, 08:39 PM

If you still have MAF sensor and housing, how much for it and auto locking hubs to 27107?

Thanks!

*Willard* · 01-26-2011, 09:24 PM

Quote:

Originally Posted by FIND

Still have the front door panels? I'm looking for the courtesy light lens on the drivers side.

Not sure if the door panels are sold or not yet, probably not. I'll wait a couple days and get back to you about it.

Quote:

Originally Posted by Fray

Is any of this interchangeable with the '93
XLT?

Aside from some of the trim parts, pretty much everything is.

Quote:

Originally Posted by hunter930

If you still have MAF sensor and housing, how much for it and auto locking hubs to 27107?

Thanks!

PM'd

*Willard* · 01-28-2011, 03:22 PM

bump

*Willard* · 02-03-2011, 07:11 PM

bumpity

dean316 · 02-04-2011, 10:24 AM

how much for the center console?

*Willard* · 02-04-2011, 03:36 PM

Quote:

Originally Posted by dean316

how much for the center console?

PM sent.

*Willard* · 02-11-2011, 06:50 PM

bump

mjones97 · 02-14-2011, 01:49 PM

Do you still have the rear axle? If so, how much if I pick it up this weekend? I live in Salem.

trush1492 · 02-14-2011, 04:22 PM

Quote:

Originally Posted by Willard

How about $30 shipped?

Hey man, just wanted to let you know that i finally got my clutch done and was able to install the shift motor and everything works great!!! Thanks a lot!!

01-16-2011, 06:08 AM	#21
walterd140 Wannabe Elite Explorer Ludlow, Massachusetts '94 Sport Join Date: Aug 2003 Posts: 355 Vehicle Specs	Found one close on Craigslist. Thanks anyway __________________ Intelligence is the ability to listen to almost anything without losing your temper

01-18-2011, 07:17 PM	#24
larivera1989 Wannabe Elite Explorer Florida 1997 Explorer XLT 4.0L Join Date: Jun 2010 Posts: 70 Vehicle Specs	how much for the stock HU shipped to 34736 __________________ 1997 Explorer XLT 4.0LOHV http://www.explorerforum.com/forums/...d.php?t=299316

01-20-2011, 06:10 PM	#26
Willard Elite tree-smasher Bloomington, Indiana 04 Ranger Edge Join Date: Mar 2007 Posts: 3,291 Vehicle Specs (Original Poster)	bumpity __________________ Jesse '94 Eddie Bauer DD/Beater "Old Faithful" RIP '04 Ranger Edge DD "Black Knight" You want to see my face?

01-20-2011, 08:21 PM	#27
bigbzc Wannabe Elite Explorer Simpsonville, S.C. 91 XLT Join Date: Apr 2008 Posts: 73 Vehicle Specs	Hey man, I need both front drive axles. I mean from the wheel all the way into the front diff. The pass side is a 2 peice and the front diff has to be removed to get the E clip out of that axle shaft so it can be removed. You can still put the hubs and rotors and stuff back on after removing the axles so that you can keep it roll-able. If you can get these out of it, how much would you take for them? Email me at bigbzc@yahoo.com __________________ '91 Xplorer, 35" swampers and BFG KM2s, custom fabbed 7" lift + 3" body lift

01-20-2011, 08:31 PM	#28
Willard Elite tree-smasher Bloomington, Indiana 04 Ranger Edge Join Date: Mar 2007 Posts: 3,291 Vehicle Specs (Original Poster)	PM'd __________________ Jesse '94 Eddie Bauer DD/Beater "Old Faithful" RIP '04 Ranger Edge DD "Black Knight" You want to see my face?

01-17-2011, 10:37 PM	#22
txng6687 Wannabe Elite Explorer El Paso, Texas 92 XLT Join Date: Jul 2007 Posts: 6 Vehicle Specs	How much for the 3 good door panels shipped to 79936?

01-26-2011, 04:25 PM	#29
Willard Elite tree-smasher Bloomington, Indiana 04 Ranger Edge Join Date: Mar 2007 Posts: 3,291 Vehicle Specs (Original Poster)	bump __________________ Jesse '94 Eddie Bauer DD/Beater "Old Faithful" RIP '04 Ranger Edge DD "Black Knight" You want to see my face?

01-26-2011, 07:11 PM	#31
Fray Wannabe Elite Explorer Richmond, Virginia 1993 XLT Join Date: Jan 2011 Posts: 20 Vehicle Specs	Is any of this interchangeable with the '93 XLT?

01-26-2011, 08:39 PM	#32
hunter930 Wannabe Elite Explorer Walburg,N.C. 1991 XLT Join Date: Feb 2010 Posts: 15 Vehicle Specs	If you still have MAF sensor and housing, how much for it and auto locking hubs to 27107? Thanks!

01-28-2011, 03:22 PM	#34
Willard Elite tree-smasher Bloomington, Indiana 04 Ranger Edge Join Date: Mar 2007 Posts: 3,291 Vehicle Specs (Original Poster)	bump __________________ Jesse '94 Eddie Bauer DD/Beater "Old Faithful" RIP '04 Ranger Edge DD "Black Knight" You want to see my face?

02-03-2011, 07:11 PM	#35
Willard Elite tree-smasher Bloomington, Indiana 04 Ranger Edge Join Date: Mar 2007 Posts: 3,291 Vehicle Specs (Original Poster)	bumpity __________________ Jesse '94 Eddie Bauer DD/Beater "Old Faithful" RIP '04 Ranger Edge DD "Black Knight" You want to see my face?

02-04-2011, 10:24 AM	#36
dean316 Wannabe Elite Explorer 1994 XLT Join Date: Oct 2010 Posts: 9 Vehicle Specs	how much for the center console?

02-11-2011, 06:50 PM	#38
Willard Elite tree-smasher Bloomington, Indiana 04 Ranger Edge Join Date: Mar 2007 Posts: 3,291 Vehicle Specs (Original Poster)	bump __________________ Jesse '94 Eddie Bauer DD/Beater "Old Faithful" RIP '04 Ranger Edge DD "Black Knight" You want to see my face?

02-14-2011, 01:49 PM	#39
mjones97 Wannabe Elite Explorer Salem, IN Join Date: Apr 2007 Posts: 426 Vehicle Specs	Do you still have the rear axle? If so, how much if I pick it up this weekend? I live in Salem. __________________ ~1986 Bronco II Eddie Bauer~ Modified Beyond Control Support our Troops!