How do you change the A/C switch?

I'm replacing the A/C switch in my '94 Explorer. Here's a link to the part:
http://www.autozone.com/autozone/pa...hByPartNumber=true&itemIdentifier=142600_0_0_

I've got the ashtray out and I've taken out a screw from the switch, but I can't seem to detach it, or detach anything else from it.

Should I take off the whole front interior panel on the driver's side? It's already really loose anyway, I think I would only have to disconnect the rear window wiper/electric defrost switches.

Just wanted to see if anyone else had done this before.

I figured out how to get the switch out and everything, not sure why I couldn't get the thing out at first but it was pretty easy.

I also figured out it's not even the switch, it must be the resistor.

Welcome to this forum! I've moved your thread into the A/C & heater section.