wont rev past 2500 rpm

Lee · January 21, 2004

My explorer won’t go past 2500 RPMS when in drive, when in park or neutral it revs fine I can’t figure out what it is, I just changed the transmission but this problem was happing before the transmission
Went did I buy a bad used tranny.can anyone give me any suggestions

Billy177 · January 21, 2004

try resetting your computer by unplugging the battery for 15min if that does not work your computer may need to be reflashed or replaced

Fhantazm · January 21, 2004

Possibly the torque converter.

Billy177 · January 21, 2004

ya never thought of that does it do it in gear #2 or reverse

Lee · January 21, 2004

i changed my torque converter when i changed the tranny, but agin it was a used tranny and used torque.

Billy177 · January 21, 2004

was it used or rebuilt

Lee · January 21, 2004

the tranny was used

Nuggethead 420 · January 21, 2004

Was the tranny rebuilt??
Mine was rebuilt and I still can't get it to work.
I may end up with the same problems.
Did yours slide in and up to the motor over the pins easy?

Lee · January 21, 2004

it did not the first time i put it in, the reason being was that the torque was not set right and it jamed the flywheel do your x start and drive

Nuggethead 420 · January 24, 2004

I got my trany running!!

But I have slipping on take-off???
when moving it seems fine but on take-off it really slips and goes at about 2500 rpm's
Did you have any similar problems with yours??

wont rev past 2500 rpm

Lee

New Member

Billy177

Explorer Addict

Fhantazm

Well-Known Member

Billy177

Explorer Addict

Lee

New Member

Billy177

Explorer Addict

Lee

New Member

Nuggethead 420

Well-Known Member

Lee

New Member

Nuggethead 420

Well-Known Member

Featured images

Featured images

Similar Threads