Where to find instuctions for headlights.

youngexplorer · October 4, 2003

I just purchased new headlights for my 95' Explorer and I was wondering if anybody knew where to find instructions on installing these. Thanks.

aldive · October 4, 2003

If you mean new bulbs, simply remove the old and put in the new in the same way the old ones came out,

Good luck......

youngexplorer · October 4, 2003

sorry, i was referring to the actual lamp the whole headlamp. ive searched but there has been no definite answer.

Bill Kemp · October 4, 2003

I'll try and scan the Haynes manual page and post ot tomorrow.
Basicly you remove the grill and useing needle nose pliars, pull out the "clips" that hold the light in.
Will post more in the AM.

Bill Kemp · October 5, 2003

I just reread the manual and above info is complete.
When removing the grill there are exposed screws accorss the top and behind the turn signals and then you just pull out on the grill to release the clips across the bottom.
Per Haynes "squeeze the plastic clips on the headlight housing to release it from the body
If your headlights didnt come with a vent button, reuse the button from your old lights. You'll see what I mean when you compare them after removal.
Might as well lube the adjusting rods while you can get to them.

edlmann · October 6, 2003

Originally posted by Bill Kemp
I'll try and scan the Haynes manual page and post ot tomorrow.

Would also like to see this.

Bill Kemp · October 6, 2003

No pics just the info on removal of clips as quoted above.

Where to find instuctions for headlights.

youngexplorer

Member

aldive

youngexplorer

Member

Bill Kemp

Elite Moderator Emeritus

Bill Kemp

Elite Moderator Emeritus

edlmann

Well-Known Member

Bill Kemp

Elite Moderator Emeritus

Explorer Features

Explorer Features

Similar threads

Featured Content