Klowns
Elite Explorer
- Joined
- August 19, 2002
- Messages
- 347
- Reaction score
- 0
- City, State
- Mesa, Az
- Year, Model & Trim Level
- '95 XL
Well after about 12 hours of work, finally got the 3" body lift put on and built the custom intake last night. Ends up that the lady that had the car previous had been in a car wreck or something before, and had replaced the bumpers, making it very hard to get them back on with the kit and stuff, had to fab every piece of the body lift besides the hockey pucks.
Gonna finish up with the exhaust on Monday, then if it turns out good, which it will, it'll sound like a beasty V8, well that's the idea anyway!!!
Figured it would be easier just to have a shop install the lift, and at the same time throw in the new gears/locker, so I'll be running my explorer with a 3" body lift and a 4" suspension lift on my little 29 inch tires, it'll be funny, atleast til I get the new tires/rims.
When all is said and done, you guys better start some trips, so I can use my explorer, heh
Gonna finish up with the exhaust on Monday, then if it turns out good, which it will, it'll sound like a beasty V8, well that's the idea anyway!!!
Figured it would be easier just to have a shop install the lift, and at the same time throw in the new gears/locker, so I'll be running my explorer with a 3" body lift and a 4" suspension lift on my little 29 inch tires, it'll be funny, atleast til I get the new tires/rims.
When all is said and done, you guys better start some trips, so I can use my explorer, heh
