Help!

[DvlRed720]

I have a 2002 Explorer Sport, 2D and had gotten rid of the stock system, replacing it with a nice Sony stereo using a Scosche wiring connector...Ive read alotta other posts of how to connect the factory subwoofer to an aftermarket stereo but just got lost in all the back-and-forths...help with any ideas?

 

[Nixthebomb]

1. connect the Yellow/black stripe wire from the main harness (switched power) to the teal/purple stripe wire from the 4wire amp harness (power wire).

2. connect the black/green stripe wire from the main harness (ground) to the black wire from the 4wire amp harness (ground).

3. connect the two wires from inside the rca cable to the red/black wire (sub speaker positive) and the brown/orange wire (sub speaker negative) from the 4wire amp harness.



Then just hook the rca connector side into your sub pre-out, toss the stereo back in the dash, and set up the sub level on your headunit and you're done!

copied from http://explorerforum.com/forums/showthread.php?t=154055