97splorer
Well-Known Member
- Joined
- April 20, 2002
- Messages
- 568
- Reaction score
- 1
- City, State
- Overland Park, Kansas
- Year, Model & Trim Level
- '97 XLT 5.0 AWD
I just need to know how to re-install my new cv shafts and make sure that they are seated in the housing 100%. They come with the circlips but after I installed them the 1st time, there was in & out play between the axle housing and the cv shaft. on the passenger side there is the long axle that goes into the diff. , that should just slide back into place right? Please, any help would be great.
Thanks-Brian
Thanks-Brian