Serpentine Belt Slipping

[ztorgo]

Hi all, I am new to the forum. The serpentine belt in my 92 eddie bauer broke the other day. I replaced the belt and every time I start the car, it makes a squelling noise and slips off. A friend suggested the tensioner pully was bad. I replaced that with a whole new tensioner unit, not just the pulley. That didn't work. Next, I replaced the idler pully with a new one. Still no luck. Its still slipping and I have no idea what the problem can be. I would appreciate any help anyone could offer. Thank you very very much!

 

[yob_yeknom]

Make sure all of the little V's on the belt are in the slots on the pulleys correctly. It's hard to see all of them sometimes, you may need a mirror.

 

[RiverRat]

Check that none of your accessory drive components like the a/c comp are frozen. If your last belt broke then you could have a problem like this.