BubbaFL
Well-Known Member
- Joined
- June 8, 2007
- Messages
- 333
- Reaction score
- 4
- City, State
- Central Florida
- Year, Model & Trim Level
- 1986 Corvette
I am installing a new (OEM) lower thermostat housing. The bolts are nice and tight, but I can see a gap between the upper and lower housing.
New thermostat and seal. Without the thermostat and seal in place, the upper housing will sit perfectly flush on the lower housing.
Is this normal, or is something not right?
New thermostat and seal. Without the thermostat and seal in place, the upper housing will sit perfectly flush on the lower housing.
Is this normal, or is something not right?