Auto & Truck Parts For Sale

Have a pair of clear euro 2nd gen corner lights. They are OEM Ford units made for Export. The bulbs are different than factory but I've included all the plugs you need to do the swap. These are 20 years old but still look good compared to aftermarket clear corners that yellow in 3 years. $80 shipped in the lower 48

Hey everyone, with the recent birth of my son I realized it's time to let go of the small parts collection I have. I no longer own an Explorer, won't be able to afford to drive one for quite some time, and have no use for what I have. Paypal is accepted, and I work for the post office so shipping will be fast, affordable, and easy. Here goes: Brand new in box Traxda 3rd gen coil spacer lift kit-2.25" front/1.5" rear total lift. Lists for $367, asking $250 or best offer. 3rd gen (also fits 4th gen) Front rain guards. Used for a year but in great shape. $15 for pair 3rd gen passenger side power mirror-good condition. $20 Tan 3rd gen XLS interior parts: Rear door panels with tweed inserts. Has minor sun bleaching on tops but...

Factory ifs tie down point for Export Explorer and Rangers. Very easy to install, retaining bracket slides in and 3 bolts hold the tie down point snug to crossmember. This is the only one I've seen. $70 shipped in the lower 48

I've got quite a few parts to get rid of from my ongoing 2016 Ford Explorer Police Interceptor Utility project. Some pictures, and some items still need to be photographed. 1. Both front black bucket seats(cloth) 2. Basically the whole factory cat back exhaust. I have the factory mufflers and Flowmaster mufflers with tips welded onto them. Willing to seperate. 3. Civilian console floor shifter and handle. 4. Terrain knob/dial 5. Factory radio. Sync 1. Manual climate controls front and rear. Faceplate, Bezel, 4" screen. (Installed Tesla android radio. Right now the audio control module is still in my dash but think I can remove it for sale too....tbd. 6. 3 quart water methanol reservoir. 7. 5 litre water methanol reservoir 8. Custom...

Sold my 3.5 NA Explorer XLT a couple months ago, and unmarried this from my truck before trading in. Buyer will have to pay to marry this to their truck, as well as whatever tunes you want to load, so just an FYI. Work with LMS on what it'll cost to get you tuned up, and I'll try to save you some $$. I don't know what that cost is going to be for you, so I'll start at $150 shipped lower 48 - if that's too high, I'll try to work with you. I know I spent ~$575 for this SCT with 3 tunes.

Soo time to let some parts go as im moving on somewhat from the 4.0 game..if you dont know me,I've built many engines on here and still probably have one of the highest hp 4.0 around.. With that said i have what i call a "top swap" for sale..these are my true aftermarket 95tm made by engine quest that are no long available..these have been milled and when combined with 90-94tm pistons give you 10.8:1 compression and with 95+ pistons will give you 9.8:1 ....these have the discontinued SI stainless steel swirl valves,custom bronze valve guides and comp cams 988 dual springs...the spring seats and valve seal tips have been milled for the springs...**no rockers are included ** ...I will also include the comp cams 422 cam and Smith brothers...

Brand NEW!!!! Ideal for performance build! I bought this a while ago and was going to go all out with my explorer but I'm a converted v8 man now so its for sale along with many many other things I have for sale, performance parts exclusively, pm me if interested....Possible trades maybe considered I'll start this off at $800 obo shipped, located in Denver, Colorado Of course if your local or have your own special shipping service itll be a lot cheaper. I need money to fund my mustang 5.0 Mercedes project. If you wanna text me number is 720-427-6613. Thanx for checking the ad! OH and yes there is a seller on ebay with these for like $700+$200 shipping and not taking offers...

I'm selling these separate or together. Complete K494 Superlift 4" Lift Kit and the coilover conversion custom brackets and hardware, Fox Shocks, and Eibach 750lb Springs. Coilover kit is 99% complete. Needs different bottom eyes and the tools to adjust the spring rings. Never been used, but have sat in a garage for a while. The very lightest of surface rust on a couple things, but otherwise perfect condition and all accounted for. Will make sure all parts are completely cleaned of rust and coated with protective wax before you get them. Also willing to paint the coilover brackets with POR15 for free. Only color I have is gloss black. K494 is for the 4 door Gen 2s, but can also be made to fit the Gen 1 Sport Tracs with just a different...

For sale I have a Explorer Express Supercharger Kit for 1996-2001 Ford Explorer's with the 5.0 V-8. Obviously this kit will work on any 5.0 with explorer FEAD and running coil packs. This kit is NO LONGER IN PRODUCTION, and this is most likely the LOWEST mileage kit out there. I purchased this kit early this spring for my V-8 swapped Ranger from a member of a Ranger forum. He purchased it BRAND NEW in Spring of 2009 and ended up going a different route and never used the kit (Pictures of the kit when new below). The engine I installed it on was a 1998 5.0, in a 1998 ranger, install was EXTREMELY smooth and painless. I've put about 3,000 miles on the setup, and it hasn't missed a beat minus a Crank sensor that failed on me (this...

Hello, I sold my explorer :( & now i am selling my very rare explorer express xcharger kit for the 5L v8 second gen explorers. This kit was removed from my local professional HI-Performance shop they told me all the bolts & brakets are included. I have included the stock coils. The supercharger has a 2" pulley & upgraded the cheap plastic idler pulleys it comes with to steel, I made about 8-9 PSI about 350 RWHP with a 347 Engine. It may make more boost on the 302. i have had this kit on for approx. 5 years, I am the first owner of it, it is a low mileage kit, I only put about 5k miles on - it was not my daily driver. it works great. This kit can be bolted onto a stock motor with no tuning with the 3 inch pulley (5-6lbs of boost). i...

Evening, for sale is an Advanced Adapters conversion kit that adapts the 60* 700r4 to the Ford 4.0 OHV. The tail housing is also included. The transmission was supposedly rebuilt when I purchased it but I have no way to confirm that. A B&M shifter is also included. I purchased this transmission and kit from JTX on the board years ago and never used it. The torque converter and mounting hardware are not included. I will post pictures when I get home. 1k O.B.O. You can text me if you would like (9two8)three08-777five. The transmission is located near Prescott Arizona but I am will to meet an hour or two away. Thank you for looking all.

i am selling the eaton m112 supercharger that i had on my explorer this is a eaton m112 that was on the 03-04 mustang cobra's that i adapted to fit under the hood of the 2nd gen explorers. i had this on my explorer for around 5 years with basically no problems what so ever and was also very driveable with the correct tuning what you will get eaton m112 supercharger head unit Reichard Racing 2.8 supercharger pulley fabricated mount to fit supercharger onto a explorer lower intake TMOSS ported lower explorer intake fabricated intake elbow that can except 98-01 external egr valve (will also include a block off if you have a 96-97 or want to delete egr system) this elbow can also except a throttle body up to 80mm fabricated coil mount...

I have a fog light switch out of I think a 94 Explorer. I haven't tested it and 1 corner is broken off the front. $3 shipped to anyone who is Elite. $13 shipped if your not Elite.

I have a complete PATS system for sale. Everything you need is here. Came out of '01 Sport SOHC AUTO 2WD. Includes: ECU PATS Module RAP module (keyless entry) PATS Key (only have the one) Matching ignition and door locks $350.

For SALE: Excellent set of tires & wheels from a '17 PI Utility. Wheels are OEM 18x8 steel, gloss black finish. Tires are Firestone Firehawk PVS 245-55VR18. Tread wear is exceptionally consistent across all four tires. Average tread depth is .214", about 62% of the original .340" value. These are one of the highest rated all weather/winter pursuit tires available. Review: [ www.prioritytire.com/blog/firestone-firehawk-pvs-review/ ] Sales Sheet: [ www.prioritytire.com/by-brand/firestone/firehawk-pvs-tires/ ] Priced at $600. includes the full set of lug nuts and if you want, the four OEM full size plastic silver colored wheels covers. (This is why the paint finish looks new on the wheels, since they were always protected from...