WHOOPS!!

Hello all. As the member who this phrase was coined after, I believe we have enough members now to start making an actual board and sub-division of Serious Explorations. Therefore, I must lay down a few rules for the nominations and elections. 1. Anybody can be nominated that is a member of the roll over posse. 2. As a member though, consideration for election must be based on a few simple factors. 2a. Stupidity-Ie, getting hammered and trying to do doughnuts in a wash. Who was that? 2b. Ammount-Ie, number of times that any one person has had at least two wheels, of the same side of the vehicle, off the ground for more than, oh let's say 30 seconds. 2c. Dedication/Damage-Ie. The amount of damage sustained to the...

Here’s my problem. Stupid me went 4x4 in my STOCK!!! Explorer and got stuck in a swamp kind of creek thing. I don't really know what is but basically flooded grass. Its winter, about -13c and about 5 in of snow. So I broke through the ground and the wheels are in ruts and spinning freely. Ground level is the frame. How do I get out? What I have available to me is a Kubota L2800 (Ruffly the same weight if not alittle heavier then the truck) with plow and Front end loader. I have a 3/4 ton come along and a 2 ton hoist. Lots of chain, no straps. I am a one man show with no help. I have tried hooking a chain to the frame and the tractor and pulled from behind the truck and got nothing but spinning tires. I have tried lowering the...

We've probably all dropped tools and had trouble finding them. Last week I started taking off the valve cover I put on my '01 Sport Trac just before it quit running for possible use on my '02. In the process, I dropped my 1/4 swivel extension. I didn't think it sounded like it fell all the way to the ground, couldn't find it, and didn't spend much time looking for it. Today I searched for it on the ground with no luck. Looking up from behind the front tire, I spotted a tiny shiny spot inside the front U-joint. Sure enough, it was the lost extension! In the couple of minutes it took me to get screwdrivers and pliers to retrieve it, the light changed and the extension wasn't visible. It wouldn't have caused a problem because the truck...

Well poop this isn't good. We got a fresh layer of snow on the ground last night. So I took the Explorer I thought I kept it 4hi the night before. But an icy turn said otherwise now I got for a fender a bumper and I guess finally fix the header panel. Poor thing.

Needless to say, I feel incredibly stupid.

Post your most stuck picture's here in this thread.

So I worked on getting my 2k explorer instrument cluster switched over to leds. Dash was easy enough to take apart, Trust me I did twice. So first I only had one side work some like darn ok. But here's the kicker when I got the instrument cluster lose again I turned it over on its bottom, and saw the wonderful blue sharpie of a pick pull. Anyway to get the actual miles? Well I maybe over the 200k mark

Ouch!!! No details about the rollover or the passengers.

The wheel spacers is the high light of this video.

I found this today: start at 4:00 minute mark

Knicked one of the boardrunners on an old date palm ladder that came out of nowhere! Made a hole in the driver rear piece of the boardrunner 😭

I just got done watching a YouTube video. I think the guy is the owner/mechanic and his shop is called something like "South Main Auto". A guy who had a 2007 Ford Escape had his truck towed to the shop. He had just finished rebuilding the engine and no matter what he tried he could not get it to start. The mechanic began by cranking the engine over and found that it behaved/sounded normal. Then he removed the first of the 4 coil-on-plugs, which were new. He immediately noticed that there was no spring-looking thing that physically connected the coil to the spark plug. He then checked coils 2-4 and they were also missing the coil-to-spark spring thing. Next he checked the fuel injectors with a noid and found them to all be receiving a...

This may be the start of my goodbye for a while from this forum. I found this tree on my 2004 Explorer the other day and I bought a 2008 Expedition to replace it. I have a for sale sign on the old beast but I think I'm going to have to sell it to a junk yard. I have only posted in one thread but I have learned a lot from lurking. Thank you all.

I got stuck in my own yard Truck dozing knocking down some brush to make a road and some small trees I ran over log about 6"to12" in diameter not to mention a couple ethere ones they wore laying down as well one of them being at least 6 inches in diameter I have a 3600 pound Ranch I doubled it up it shorted and I think it's smoked checked itself or at least the relay did route the cableroute the cable on my hand which as well trying to pull myself out backwards I will send more pics of it tomorrow when there is more light and phone is chard

I just recently pulled my 5.0 out of my 98 due to it running like crap, no power, and terrible fuel economy (well worse than a 5.0 usually gets). The truck got dunked during Harvey, but it still ran. Couldn't figure out the problem. Popped the oil pan and it was all clear then! :banghead: Yup that's parts of a piston in the oil pickup Piston (B) was very unhappy after colliding with Crankshaft (A) Piston #6 Piston #8 Yeah.... water and engines don't mix. :nono: