dasfinc
Well-Known Member
- Joined
- February 11, 2009
- Messages
- 176
- Reaction score
- 0
- Year, Model & Trim Level
- 1999 SOHC Exploder
Yay new build thread!
With my 1998 ford ranger having finally been scrapped, I now need a new home for my Supercharged 5.0, so here is the start of my build thread for my new platform!
Ordering my first pile of new parts:
For this:
To go into this:
Engine:
GT-40P Headed 5.0 V-8 from a 1998 ford explorer
M90P Headunit X-Charger at 8PSI
46lb injectors
Walbro 255LPH fuel pump
K+N Panel filter in stock intake
A/C Deleted
ProForm 1.6 Roller Rockers
CompCams Double roller timing chain
CompCams Hydro roller lifters
CompCams K35-349-8 Camshaft *Specs below*
Truck:
1997 Ford Explorer Sport
5 speed/2wd
White on grey
Black Cragar "Soft 8's"
I purchased this truck from its first owners at 106K miles late in 2009. I ended up trading it to a friend in May of 2010. My friend put $1000 into suspension and tires, and then unfortunately bent the shift fork inside the transmission over winter of 2010. I bought it back and had the transmission repaired with a fresh clutch and have been using it as my daily driver since late spring.
Plans:
Buy an M5OD-R2 Transmission to put behind the motor
Torque Monster Headers
SCT and a real tune
Basic fresh coat of paint.
Goals:
13.XX my first time out with it, I'd like to snag a 13.5 or better on my regular wheels, and 350whp/400wtq without nitrous or alky.
With my 1998 ford ranger having finally been scrapped, I now need a new home for my Supercharged 5.0, so here is the start of my build thread for my new platform!
Ordering my first pile of new parts:
For this:
To go into this:
Engine:
GT-40P Headed 5.0 V-8 from a 1998 ford explorer
M90P Headunit X-Charger at 8PSI
46lb injectors
Walbro 255LPH fuel pump
K+N Panel filter in stock intake
A/C Deleted
ProForm 1.6 Roller Rockers
CompCams Double roller timing chain
CompCams Hydro roller lifters
CompCams K35-349-8 Camshaft *Specs below*
Truck:
1997 Ford Explorer Sport
5 speed/2wd
White on grey
Black Cragar "Soft 8's"
I purchased this truck from its first owners at 106K miles late in 2009. I ended up trading it to a friend in May of 2010. My friend put $1000 into suspension and tires, and then unfortunately bent the shift fork inside the transmission over winter of 2010. I bought it back and had the transmission repaired with a fresh clutch and have been using it as my daily driver since late spring.
Plans:
Buy an M5OD-R2 Transmission to put behind the motor
Torque Monster Headers
SCT and a real tune
Basic fresh coat of paint.
Goals:
13.XX my first time out with it, I'd like to snag a 13.5 or better on my regular wheels, and 350whp/400wtq without nitrous or alky.