rfields109
Member
- Joined
- April 15, 2011
- Messages
- 23
- Reaction score
- 0
- City, State
- Tulsa, OK
- Year, Model & Trim Level
- '94 XLT 4x4
Just replaced radius arm bushings with Polypropolene should I get the front end aligned ? Noticed on the test drive it tracked nicely until i got up to about 65, then all heck broke loose on the right front, felt like wheel hop or a BIG shimmy... slowed down to about 60 and it straightened back out. I felt like it would need alignment but this seemed extreme. Before the bushings it travelled down the road at 80 just fine.
The question is would replacing the radius arm bushings knock it that far out of alignment? I have new tie rod ends, ball joints etc... coming and thought I would get it aligned after I've rebuilt it. So this post is more out of curiosity and gaining some education on front end work.
Thanks guys
The question is would replacing the radius arm bushings knock it that far out of alignment? I have new tie rod ends, ball joints etc... coming and thought I would get it aligned after I've rebuilt it. So this post is more out of curiosity and gaining some education on front end work.
Thanks guys