Rocketman11706
Member
- Joined
- February 24, 2007
- Messages
- 42
- Reaction score
- 4
- Location
- Long Island
- City, State
- Babylon, New York
- Year, Model & Trim Level
- 2013 XLT
Guess its my turn, and on one of the hottest days of the year, no less. One minute, MAX A/C is blowing through the vents just fine, next minute its only blowing through the defroster and floor vents. Only position on the knob that changes anything is "off". 2002 Explorer 4L V-6. I took two photos shown below, both under the blower motor on the passenger side. Plastic thingy with a T-vacuum line attached to it; one gray, one black. Is this the plastic "ball-shaped" thing I've read is supposed to be under the passenger side wheel well, or is there another one there I'm supposed to look for? Are these the two vacuum lines that either pop off or break? If the vacuum lines are still connected and not punctured, what needs to be replaced to make everything all better again? P.S. Hot and cold still work fine.
Thanks,
Larry
Thanks,
Larry