LONO100's SPORT TRAC BUILD | Page 2 | Ford Explorer Forums - Serious Explorations

  • Register Today It's free!

LONO100's SPORT TRAC BUILD

well, it'll be a year this week that ive had my explorer and ive completed most of the mods ive planned so i thought it would be a good time to finally do my registry. this one is going to be extensive!

my name is ken, if anyone ever wants to reach me my email is underground707@gmail.com or you can just message me here on the forum, im always on here wasting time. here's some info on my rig:

2003 Ford Explorer Sport Trac XLT
2WD
bought it for 12k and it was in pristine condition with only 60k miles on it.

my current specs and mods can be found on my vehicle specs tab

here's my build:

this is how she looked when we brought her home.
014.jpg

pretty much stock with a camper shell, class III hitch and brake controller

this was our first ride in the mud about the same time last year
124.jpg


the first thing i modded was getting a grill overlay to put over the honeycomb grill just to give it a little character.
before:
004.jpg

after:
007.jpg


this is a pic of my engine with the KN intake installed.
010.jpg


my next project was getting some fresh bright bulbs in the dash. i changed them all, stayed with the same color just some fresher brighter burning bulbs
(#194). if you plan to do this, change out all the bulbs including the HVAC controls so you wont have to take it all apart if one goes out.
CIMG0451.jpg


i then painted my radio bezel to match the exterior paint to give it a little custom look inside, without going too custom
CIMG0464.jpg

CIMG0467.jpg


my next project was painting the awful grey cladding.
before:
P1020155.jpg

P1020157.jpg

P1020152.jpg

after:
P1020165.jpg

P1020159.jpg

P1020162.jpg


my next and much needed project was finding a set of black wheels and some good mud tires. this was my most fruitful project because i actually made money on this project. by being extremely vigilant on craigslist, i was able to find a set of black 15" wheels with fresh pro comp mud tires on them for 400 bucks. with my infamous negotiation skills i talked the guy down to 200 bucks and got a set of black wheels and fresh mud tires that looked awesome!
P1050667.jpg


here's what they looked like when they went on;
WP_000020.jpg

WP_000023.jpg


i rode on these treads for two months before i was able to sell just the tires to a jeep owner for a whopping 400 bucks! i made 200 bucks on these treads AND i got to keep the black wheels! biggest score of my summer in 2011. i took that profit and sold my stock wheels for 600 and used that to go toward my locker and 33" tire project which you will see later.

next on my project list was to get some much needed shocks. my stock shocks were completely blown, and my buddies would say my trac rode like a boat. i went with a set of rancho RS5000 all the way around. i was able to find a set on 4wheelonline for 159.00 shipped WITH a 50.00 rancho mail in rebate. 110 bucks for shocks, score!
WP_000273.jpg

WP_000281.jpg


with the black wheels, my custom grill no longer matched, so i broke out the paint and redid my grill;
V__00C5.jpg


here are a few pics of how she was looking at this point;
WP_000043.jpg

WP_000046.jpg

you'll notice in these pics i just swapped out that long stock antenna for a little stubby black autozone antenna for 8 bucks.

my next project was to install a CB radio and roof rack. im a nut for cleanliness, so i planned and waited to get my roof rack before i slapped the cb radio on, that way i could conceal the antenna cable for a neat look.

this is how i fed the antenna into the cab:

15' of wire on a magnet mount antenna and i mounted the antenna right above the brake light and worked my way into the cab
P1050771.jpg


fed the wire through the door seals
P1020781-1.jpg


pulled the trim and fed it along the door jambs
P1050773.jpg


and the coaxial landed perfectly under the ash tray!
P1050779.jpg


tapped a fuse
P1050782.jpg


grounded it
P1050783.jpg


and mounted the radio
P1050786.jpg

super clean look, no drilling, no loose wires
P1050787.jpg

fully functional and i get great SWR readings, pretty close to 1.0 on ch20

i zip tied the wires under my roof rack
P1020776.jpg

P1020777.jpg


here's how it looked with the roof basket on
P1020767.jpg


here's a few pics of how she looked so far, and how she put in work on our camping trips in summer of 2011
264.jpg

292.jpg

302.jpg

304.jpg

031.jpg

010-1.jpg

013.jpg

172.jpg


next, i got into the real meat and potatos of my build and installed my rear aussie lockers. it took me a little research on what i wanted, what would fit my needs best and i decided that a lunchbox type locker would be the best fit for me. i went with the aussies, and it's the best mod ive made by far! here are a few pics of the project
materials for the install
039.jpg


pics of the pumkin opened up before the lockers went in
052.jpg

058.jpg


axle shafts pulled
063.jpg

spider gears out!
065.jpg


lockers in!!!
077.jpg

079.jpg


my first problem i had with my trac was when i got a CEL code. it read back as P0171/P0174. the guys who read my codes for free told me they wanted to take apart the engine down to the lower intake manifolds, and a whole bunch of other crap to solve the problem and it would start at 600 bucks. i told them to go F themselves and went to the forum for help. luckily, ncranchero aka sport trac yoda pointed me to this infamous rubber elbow problem
WP_000631.jpg

i was able to resolve the issue for a dollar. thanks ranchero!

after a little planning and a lot of procrastinating i finally got my lift and 33"s on. i went with 33" goodyear duratracs on midnightrebel's recommendation and i got to say, these are hands down the best tires ive ever bought. if rebel ever makes his way out to the west coast i owe him a few beers. i did a simple shackle/TT lift. went with the tried and true warrior #153 shackles and twisted those torsion bolts. got 3" lift all the way around (2WD!). here are some pics of the project.

shackles came in the mail:
P1050895.jpg

used my jack to give me a little help in lining up the shackles
P1050901.jpg

P1050904.jpg


after the lift but sitting on my stock wheels as my black AR-767's were at the shop getting the 33"s on.
P1050909.jpg

P1050910.jpg


P1050915.jpg


and bam!
P1050924.jpg

P1050923.jpg

P1050922.jpg

P1050927.jpg


slapped the spare on the roof
P1060009.jpg


next i slapped my alpine in and got rid of that god awful stock deck.
P1050890.jpg

P1050891.jpg


well, the winter came and so i slapped the camper shell on
P1040866.jpg

P1040858.jpg

the dogs were greatful
P1040872.jpg


and that's what she pretty much looks like today, now that the warm weather is coming around and the days are longer, more projects are in the hopper. i already sourced a new radio bezel (thanks to midnight rebel for the tip) for my roof rack light install, and thats going to be next. i was planning on learning how to weld this past winter, but a pretty bad car accident sidelined me. im back on my feet and ready to go, so i will also be planning on rock sliders and a hitch mounted spare tire carrier. i have a magnaflow exhaust, but i might switch it out to a gibson or flowmaster catback system, and im thinking that since im 2WD, i should look into getting myself a winch. i might go the hitch mounted route so i can switch it to the front and rear if need be.

thanks to the forum and all the great members, i wouldnt have been able to mod my trac to the way i wanted it without the EF. ive done write ups to all of these projects so the know-how is out there, just use the search bar! if anyone would like to try any of the projects i did, or if you want to ask me questions about anything, just message me, im always on the forum and ready to help you with whatever knowledge i have, and if i cant help you, ill try and point you in the right direction to who CAN help you. thanks again to everyone, ill leave with some pictures of a few places where my trac has taken me and my friends since ive owned her. cant wait for summer 2012 to roll around, much more pics and adventures to come!

tahoe desolation wilderness
P1040839.jpg

P1040833.jpg

P1040805.jpg

P1040814.jpg


cascade falls
102.jpg

107.jpg

093.jpg

037.jpg


genoa peak
138.jpg

151.jpg

028.jpg


lake tahoe
106.jpg

243.jpg


on the road
011.jpg


pinnacles monument and hollister hills
139.jpg

073.jpg

P1020972.jpg

P1020970.jpg

220.jpg

052.jpg

P1020976.jpg


richardson grove (redwood forest)
009.jpg

176.jpg

212.jpg

218-1.jpg


my duffel, been with me on a ton of trips already, and on many plane rides too!
WP_000331.jpg

WP_000332.jpg


hope you guys enjoyed the build and pics as much as ive enjoyed all of yours. this forum really gets me through the work day!

more projects to come this summer.
 



Join the Elite Explorers for $20 each year.
Elite Explorer members see no advertisements, no banner ads, no double underlined links,.
Add an avatar, upload photo attachments, and more!
.





the crossbars im using right now are some cheapies from ebay that are based on the standard square bars offered by thule. after last winters snow and rain, the locking mechanisms on them are starting to rust out.

if you want the best crossbars on the market, the best are by far the thule aeroblades. a set of those with the towers will run you 300 bucks or so. i did some part time work at a truck outfitter shop and ive installed my fair share of crossbars and the thule aeroblades sit low, look awesome, they are much lighter than anything on the market, and have the best strength to weight ratio. the best part is that they are dead silent even at freeway speed. no joke. i was so impressed by them, i bought my sister a set and they really are awesome. they are worth the money if you can afford it.

with that said, if you dont have 300+ to spend on crossbars, there are plenty of cheaper sets you can find on ebay and amazon. midnightrebel bought a cheap set off ebay that he loves, you might want to PM him to get the exact model info.

im planning on getting another set of crossbars, what im doing is trolling cragislist for a good used thule or yakima set. hope this helps, let me know if you have any other questions.
 



Join the Elite Explorers for $20 each year.
Elite Explorer members see no advertisements, no banner ads, no double underlined links,.
Add an avatar, upload photo attachments, and more!
.





Love the Trac man. I'm think of leaving the 265 75 16s and getting some 33s. Was the torsion twist and shackle lift enough on it's own to fit the bigger treads?
 






Yep, with tt, sl and some trimming you can fit 33's with no problem.
 






I know I cant go more then about 2 inches on my TT because I have a 4wd. Will the 2 inches still be enough? I'm just trying to avoid the cost of a body lift but if I need it, then I need it.
 






it should be enough, you will get some rubbing and you will need to trim, but its not too bad. a great set of 33" tires make all the difference off road, and in the snow. i cant say it enough.
 






Thanks for the help, and I might do the thinner set of 33s instead of the bully 12.5s. I think there is a 355 85r16. Thinner might be easier for me since I don't have a body lift.
 






255 not 355, my truck would probably not roll with a 355 haha.
 






Beautiful ST man, gotta love vehicles that can take you to that pretty scenery. Looks great with the Duratracs too, those are easily my favorite tire ever. Have you considered doing the bottoms of your door panels to keep the black running from one end of the cladding to the other?

Oh, and congrats about getting into Off Road Magazine!
 






nice ride you built there, amazing, am going to copy some ideas on my Trac :)
 






Beautiful ST man, gotta love vehicles that can take you to that pretty scenery. Looks great with the Duratracs too, those are easily my favorite tire ever. Have you considered doing the bottoms of your door panels to keep the black running from one end of the cladding to the other?

Oh, and congrats about getting into Off Road Magazine!

thanks, much appreciated obie. do you mean painting the bottom of my door panels black?
 






nice ride you built there, amazing, am going to copy some ideas on my Trac :)

thanks so much. feel free to message me any time if you need any help.
 












Man I'm jealous. I didn't get to use my board rack this winter except once and it wasn't even on my Trac.
 






Yup, I just bought a new board and bindings for 60% off and I can't wait to go out again. I have to be in Las Vegas for a bachelor party this weekend, but we will def be out on the slopes next weekend.
 






Dude that's awesome! Now I'm really jealous lol. I don't get any snow at school in South Carolina unfortunately :(
 






Sport trac

The engine looks like mine except your oil fill is oppisite of mine. What is the manufacture date?
Nice job on your S/T!!!!
 






Where did you get that Emblem made at????
 






Hey Lono100, so where did you get the rear leaf shackles from and can you provide the link. Also, how does it ride with the torsion bar twist? Have you noticed a difference in ride? Is it rougher? In other words, would you reccommend doing the torsion bar twist with the shackles or would you reccommend going some other route to get the lift done?
 






Hey Lono100, so where did you get the rear leaf shackles from and can you provide the link. Also, how does it ride with the torsion bar twist? Have you noticed a difference in ride? Is it rougher? In other words, would you reccommend doing the torsion bar twist with the shackles or would you reccommend going some other route to get the lift done?

the shackles are warrior product #153 shackles. i just googled to find the cheapest price and got them straight off amazon. just search "warrior product #153 shackles" on amazon and they should come up for about 80 bucks shipped to your door.
 



Join the Elite Explorers for $20 each year.
Elite Explorer members see no advertisements, no banner ads, no double underlined links,.
Add an avatar, upload photo attachments, and more!
.











Back
Top