Driveshaft Bolts

[tlh20fan]

My 89 Bronco II has the factory axles still installed. I am trying to get the splined bolts that is connecting the driveshat off. I have a 1/2" spline socket but it doesnt seem to be the correct size. Does anyone know the correct size of these bolts or some other way to get these thins off?

 

[BrooklynBay]

This tool might help you: http://www.explorerforum.com/reviewpost/showproduct.php/product/458/cat/all

 

[rookieshooter]

It's either 12 or 13 MM socket. Most all your bolts are metric. The post before me said 12mm.

 

[4x4junkie]

Yes, 12mm 12-pt.

 

[datekm]

12mm.

 

[eclipse2001gt]

use some musle to get it loose. Or if you have a lift use it to get to the bolts with wrench. Thats all i did when i had to replace the rear drive shaft when it decided to take a crap on me.

 

[blindtoe]

12 12 point with a wobble extensiom

 

[89broncoii4x4]

Hi new guy here . I was just wandering if anyone knows the thread pitch of the bolts . I don't mean to hijack a thread just semmed relavant .

 

[snoranger]

Hi new guy here . I was just wandering if anyone knows the thread pitch of the bolts . I don't mean to hijack a thread just semmed relavant .

The stock bolts are 12mm x 1.75 x 25mm long, 12mm - 12point head, class 12.9

 

[89broncoii4x4]

Thanks dude