Has anyone done this? Don't care much for the letters on the hood. I know what I'm driving
It's really pretty easy. I've debadged my previous cars so it's the same process.
Tools needed:
-Heat gun or blow dryer
-Dental floss
-scratch remover or rubbing compound
-wax
-microfiber towel
Step 1:
Heat all the letters with your blow dryer
Step 2:
Take the dental floss, and literally floss each letter off. ( apply pressure towards the hood of the car and try not to pry the letters off, but floss it off till they fall off if that makes sense)
Step 3:
Use rubbing compound or scratch remover ( Scratch-X works good) and the microfiber towel to buff out the debris from the adhesive.
Step 4:
Once the debris is removed, use the wax ( I prefer Klasse) to buff the area clean.
Step 5:
Grab a cold one and admire your hard work
13tuxedosport I put the (Taurus) SHO ecoboost badge in place of the factory ecoboost4wd ,and love it
here is the emblem
here is the emblem
here is the emblem
Was the grille emblem from ebay also? I saw them on there but wasnt sure about the quality. Any good?And the black grill emblem
Yes they are pretty good quality. . I believe its a factory aluminum stamped piece just paintedWas the grille emblem from ebay also? I saw them on there but wasnt sure about the quality. Any good?
SHO badge on an Explorer....wow. Good job, what's next?
SVT badges?
Hhahahahahah. If that gets you going. Wait until you see these stuck on the front!!!!!!!!!!! To each their own....... http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&vxp=mtr&item=261397682418 The sports are actually the same engine as the interceptor. So it's not really false advertising like the SHO badge that belongs to Taurus. The explorer is basically an oversize Taurus anyway. Seven seater Taurus to be exact.. LMAO http://www.autoblog.com/2013/08/20/fords-explorer-based-police-interceptor-365-hp-ecoboost/