Alexgrant23
New Member
- Joined
- August 19, 2016
- Messages
- 6
- Reaction score
- 0
- City, State
- Preston, Lancashire
- Year, Model & Trim Level
- 1998 Explorer 4.0 SOHC
Hello everyone I have a 98 SOHC V6 in the UK and it is running very rough on cold start ups. I've replaced the PCV valve and the idle air control valve which did make a difference, albeit for the engine to rev quite high every time it's started hot or cold. Is there any suggestions on what I could do next to remedy this? I should point out that there are no error codes or check engine lights at all.
I'm leaning towards the EGR valve and the manifold gaskets.
Thanks in advance
I'm leaning towards the EGR valve and the manifold gaskets.
Thanks in advance