beatstanfurd
Member
- Joined
- February 26, 2014
- Messages
- 18
- Reaction score
- 4
- Year, Model & Trim Level
- 2014 4DR XLT Explorer 4WD
Hello everyone,
This upgrade was a long time coming, but was put on hold while the dealership did a warranty fix on my radio reception. Ended up needing to replace the antennae mount and its wiring. Only took the dealership about four months to fix it, but I digress.
The actual physical swap was really easy. I used the 4d video as a guide and everything went smoothly. The one thing I forgot to get before the swap was some double sided automotive tape to mount the GPS, so not quite done.
I have the Sync 3 upgraded to the current 18093. Surprisingly, the APIM I purchased off of eBay was suppose to be a non Nav, but once it fired up, I had navigation. The about screen shows I have 1.15 NA maps.
Programming the APIM has been a little problematic. The MFT used the following:
2014 EX XLT As Built
Accessory Protocol Interface Module Inst
7D0-01-01 2221 1000 6B97
7D0-01-02 0401 4000 0221
7D0-02-01 5553 0004 0086
7D0-02-02 8200 0000 005D
7D0-02-03 0000 DC
7D0-03-01 014B 5803 0082
7D0-04-01 0103 0200 00E2
7D0-04-02 0001 DE
I used the following As Built from a similarly equipped 2017:
2017 EX XLT As Built
Accessory Protocol Interface Module Inst
7D0-01-01 2A2A 0502 0C40
7D0-01-02 0289 0004 9A03
7D0-02-01 5553 0104 C047
7D0-02-02 0200 8000 005D
7D0-02-03 0005 E1
7D0-03-01 0000 0002 00DD
7D0-04-01 0100 0100 0BE9
7D0-04-02 0002 DF
7D0-05-01 1A2C 1A2C 2B94
7D0-05-02 FCDA
7D0-06-01 805E
7D0-07-01 0A00 3300 001C
7D0-07-02 0000 1770 0067
7D0-07-03 0056 5688 0015
7D0-07-04 886A
I started off with reprogramming the APIM with all the data from the 2017. Right off the bat, I had issues with volume cranked way up and the volume know not working. That was fixed using the spreadsheets (don't remember the exact code for it, but I should note it in case I have to start over with the AB data.)
I do have some remaining issues that I have yet to resolve.
The first two issues were also experienced by a user on the F150 forums, but an actual fix was not posted from what I can tell. I've messaged the user and waiting to hear back. FORScan - software to enable/disable features in your truck - Ford F150 Forum - Community of Ford Truck Fans
Some of the settings I was looking into:
Aux Input Installed (Feature 1) & Ignition Type (IT) & Speaker Fader in menu
APIM 7D0-01-01 xxxx x4xx xxzz (have a keyed ignition, not push button)
Climate Front Zone & Steering Wheel Angle Sensor (SWAS) & HD Radio, DAB
APIM 7D0-01-01 xxxx xxx3 xxzz (have a HD capable ACM)
Climate Control Type
APIM 7D0-01-02 xxxx x2xx xxzz
Heated Steering Wheel & Heated/Cooled Seats
APIM 7D0-01-01 xxxx xxxx x3zz (heated seats only)
Rear Climate Control Type & Heated Windshield HMI (HW HMI) & Common Global Electrical Architecture (CGEA)
APIM 7D0-01-02 xxxx xxxx 9xzz (not sure about this one; apparently 9 is default)
Parking Brake Type
APIM 7D0-02-02 xx0x xxxx xxzz (mechanical, not electrical)
SYNC 3 Theme
APIM 7D0-02-01 xxxx xDxx xxzz (GT boot screen)
APIM 7D0-03-01 xxxx x4xx xxzz (GT theme)
Drivetrain Type
APIM 7D0-03-01 xxxx xxx3 xxzz (4WD)
What is the following and should it be done?
PAM APIM Display Functions 11-18MY PAM 736-03-01 xxxx x..* xxzz 0 (SYNC 2 Vehicles), 8 (SYNC 3 Vehicles) Change for SYNC 2 to 3 upgrades
I'll see if I can find a free hosting site for some pics.
Thanks in advance and I do appreciate any input.
This upgrade was a long time coming, but was put on hold while the dealership did a warranty fix on my radio reception. Ended up needing to replace the antennae mount and its wiring. Only took the dealership about four months to fix it, but I digress.
The actual physical swap was really easy. I used the 4d video as a guide and everything went smoothly. The one thing I forgot to get before the swap was some double sided automotive tape to mount the GPS, so not quite done.
I have the Sync 3 upgraded to the current 18093. Surprisingly, the APIM I purchased off of eBay was suppose to be a non Nav, but once it fired up, I had navigation. The about screen shows I have 1.15 NA maps.
Programming the APIM has been a little problematic. The MFT used the following:
2014 EX XLT As Built
Accessory Protocol Interface Module Inst
7D0-01-01 2221 1000 6B97
7D0-01-02 0401 4000 0221
7D0-02-01 5553 0004 0086
7D0-02-02 8200 0000 005D
7D0-02-03 0000 DC
7D0-03-01 014B 5803 0082
7D0-04-01 0103 0200 00E2
7D0-04-02 0001 DE
I used the following As Built from a similarly equipped 2017:
2017 EX XLT As Built
Accessory Protocol Interface Module Inst
7D0-01-01 2A2A 0502 0C40
7D0-01-02 0289 0004 9A03
7D0-02-01 5553 0104 C047
7D0-02-02 0200 8000 005D
7D0-02-03 0005 E1
7D0-03-01 0000 0002 00DD
7D0-04-01 0100 0100 0BE9
7D0-04-02 0002 DF
7D0-05-01 1A2C 1A2C 2B94
7D0-05-02 FCDA
7D0-06-01 805E
7D0-07-01 0A00 3300 001C
7D0-07-02 0000 1770 0067
7D0-07-03 0056 5688 0015
7D0-07-04 886A
I started off with reprogramming the APIM with all the data from the 2017. Right off the bat, I had issues with volume cranked way up and the volume know not working. That was fixed using the spreadsheets (don't remember the exact code for it, but I should note it in case I have to start over with the AB data.)
I do have some remaining issues that I have yet to resolve.
- Clock shows --:-- despite the time being correct in the settings.
- None of the preset station buttons work to change the radio. I can long press them to reprogram the buttons to the current station, but a short press doesn't change the station
- My climate section isn't working. The temps are not listed and the heated seats do not work. On the home screen, the heated seats are grayed out. I have no controls over the rear climate.
- The voice button/switch on my steering wheel does not work after the switch.
The first two issues were also experienced by a user on the F150 forums, but an actual fix was not posted from what I can tell. I've messaged the user and waiting to hear back. FORScan - software to enable/disable features in your truck - Ford F150 Forum - Community of Ford Truck Fans
Some of the settings I was looking into:
Aux Input Installed (Feature 1) & Ignition Type (IT) & Speaker Fader in menu
APIM 7D0-01-01 xxxx x4xx xxzz (have a keyed ignition, not push button)
Climate Front Zone & Steering Wheel Angle Sensor (SWAS) & HD Radio, DAB
APIM 7D0-01-01 xxxx xxx3 xxzz (have a HD capable ACM)
Climate Control Type
APIM 7D0-01-02 xxxx x2xx xxzz
Heated Steering Wheel & Heated/Cooled Seats
APIM 7D0-01-01 xxxx xxxx x3zz (heated seats only)
Rear Climate Control Type & Heated Windshield HMI (HW HMI) & Common Global Electrical Architecture (CGEA)
APIM 7D0-01-02 xxxx xxxx 9xzz (not sure about this one; apparently 9 is default)
Parking Brake Type
APIM 7D0-02-02 xx0x xxxx xxzz (mechanical, not electrical)
SYNC 3 Theme
APIM 7D0-02-01 xxxx xDxx xxzz (GT boot screen)
APIM 7D0-03-01 xxxx x4xx xxzz (GT theme)
Drivetrain Type
APIM 7D0-03-01 xxxx xxx3 xxzz (4WD)
What is the following and should it be done?
PAM APIM Display Functions 11-18MY PAM 736-03-01 xxxx x..* xxzz 0 (SYNC 2 Vehicles), 8 (SYNC 3 Vehicles) Change for SYNC 2 to 3 upgrades
I'll see if I can find a free hosting site for some pics.
Thanks in advance and I do appreciate any input.