ADDING LED LIGHTS INSIDE

[davidmmm69]

Alright so I have my 2010 Explorer and I am trying to add some LED lights under the dash on each side.
I was able to accomplish this with ease on my mustang and Mountaineer. But for the love of me I can not find any wire to tap into to come on with the dome lights? Tried behind the kick panels on both sides and swear i tried every wire...

Can any one point me in the direction to which wire to tap into? I have the 4 led strips already to go.

Thank you in advance..

David

 

[DiGiornoRisingCrust]

I’d just use a fuse tap. You’ll need type ATC. Fuse 23 should be the one for interior lights.

Just take out the old fuse, put it in the lower slot of the tap, and put the tap into the fuse slot.

 

[davidmmm69]

I’d just use a fuse tap. You’ll need type ATC. Fuse 23 should be the one for interior lights.

Just take out the old fuse, put it in the lower slot of the tap, and put the tap into the fuse slot.

but that wont work when I open the doors