Solved 2020 FORSCAN Discussion

[PlatinumOwner]

Here is an updated link for the 2011-2020 spreadsheet. I should have more time to work on documenting additional settings for 2020's soon. Please PM me if there is something in particular that you need.

FORScan Ford Explorer 11-20MY

 

[Mikey*TX]

Can't access the doc. I use chrome.

 

[iTonyp]

Here is an updated link for the 2011-2020 spreadsheet. I should have more time to work on documenting additional settings for 2020's soon. Please PM me if there is something in particular that you need.

FORScan Ford Explorer 11-20MY

Could not send you a private message. It says Oops could not start a conversation with PlatinumOwner.

Thank you for your hard work. I had a 2016 Limited Explorer and benefited from you help. Now i have a 2020 Limited cant wait to see all that can do with the new settings and updates.

Transaction ID: 41G79756T3288005H

 

[Mikey*TX]

iTonyp, it's one of our Elite Explorer perks. I deal wit the same issue on triketalk.com

 

[PlatinumOwner]

Could not send you a private message. It says Oops could not start a conversation with PlatinumOwner.

Thank you for your hard work. I had a 2016 Limited Explorer and benefited from you help. Now i have a 2020 Limited cant wait to see all that can do with the new settings and updates.

Transaction ID: 41G79756T3288005H

Thank you Tony. Here are a couple new settings for 2020s. I haven't tested this as I only have a 2016 for real-world testing at the moment.

Enable Global Close (Windows)
726-11-01
xxxx-xxxx-x1zz
726-22-01 (726-22-02 is global open which is enabled by default)
0101-0101-01zz

Dark Car Mode
726-33-02
xxx1-xxxx-xxzz

 

[PlatinumOwner]

Untested
Locking light feedback (default 1)
726-21-01
xxxx xxxx x*zz
Order for the 1 settings in this block: Key 1, Key 2, Key 3, Key 4, Vehicle

Untested
Locking audible feedback (default 1)
726-24-02
xxxx xxxx x*zz
Order for the 1 settings in this block: Key 1, Key 2, Key 3, Key 4, Vehicle

Untested
Bambi mode (Allow fogs with high beams)
726-39-02
x..* xxxx xxzz
1 = Disabled, 0=Enabled

Untested
SecureIdle (Already enabled on 2020s)
726-64-01
x*xx xxxx xxzz
1 = Disabled, 0=Enabled

 

[peterk9]

Can't access the doc. I use chrome.

I use Chrome as well and was able to open the document.

Peter

 

[Mikey*TX]

FORScan Ford Explorer 11-21MY

Shared by Brandon Cholodenko

www.icloud.com

 

[iTonyp]

Untested
Locking light feedback (default 1)
726-21-01
xxxx xxxx x*zz
Order for the 1 settings in this block: Key 1, Key 2, Key 3, Key 4, Vehicle

Untested
Locking audible feedback (default 1)
726-24-02
xxxx xxxx x*zz
Order for the 1 settings in this block: Key 1, Key 2, Key 3, Key 4, Vehicle

Untested
Bambi mode (Allow fogs with high beams)
726-39-02
x..* xxxx xxzz
1 = Disabled, 0=Enabled

Untested
SecureIdle (Already enabled on 2020s)
726-64-01
x*xx xxxx xxzz
1 = Disabled, 0=Enabled

Will try these this weekend and let you know if they work. Thank you for your hard work.

 

[iTonyp]

Thank you Tony. Here are a couple new settings for 2020s. I haven't tested this as I only have a 2016 for real-world testing at the moment.

Enable Global Close (Windows)
726-11-01
xxxx-xxxx-x1zz
726-22-01 (726-22-02 is global open which is enabled by default)
0101-0101-01zz

Dark Car Mode
726-33-02
xxx1-xxxx-xxzz

Thank you. I kind of miss my 2016 i really like that trim especially the package i had.

 

[iTonyp]

Will try these this weekend and let you know if they work. Thank you for your hard work.

Was able to test most of those new settings.

What works:
Bambi mode (Allow fogs with high beams)
726-39-02
x..* xxxx xxzz
1 = Disabled, 0=Enabled

SecureIdle (Already enabled on 2020s)
726-64-01
x*xx xxxx xxzz
1 = Disabled, 0=Enabled

Did Not Work:

Enable Global Close (Windows)
726-11-01
xxxx-xxxx-x1zz
726-22-01 (726-22-02 is global open which is enabled by default)
0101-0101-01zz
(settings were able to be written but could not activate via remote to close)

 

[PlatinumOwner]

Was able to test most of those new settings.

What works:
Bambi mode (Allow fogs with high beams)
726-39-02
x..* xxxx xxzz
1 = Disabled, 0=Enabled

SecureIdle (Already enabled on 2020s)
726-64-01
x*xx xxxx xxzz
1 = Disabled, 0=Enabled

Did Not Work:

Enable Global Close (Windows)
726-11-01
xxxx-xxxx-x1zz
726-22-01 (726-22-02 is global open which is enabled by default)
0101-0101-01zz
(settings were able to be written but could not activate via remote to close)

Thanks for confirming those, did you press lock on the remote before holding it down when testing global close?

 

[iTonyp]

Thanks for confirming those, did you press lock on the remote before holding it down when testing global close?

Yes tried single press then long hold. Tried double lock long press and tripple.

 

[PlatinumOwner]

Yes tried single press then long hold. Tried double lock long press and triple.

Thanks, it might also require a change in the passenger and driver door modules. I’ll check that out.

 

[iTonyp]

Thanks, it might also require a change in the passenger and driver door modules. I’ll check that out.

OK let me know.

 

[PlatinumOwner]

OK let me know.

I believe I found it, this needs to be set in the PDM and DDM in addition to the two settings in the BCM. I also have a code to enable the Global Close option in the menu for Sync 3.4 and maybe the instrument cluster too.

740-02-08
xxxx-xxxx-x1zz Change the 1 to 0

741-02-08
xxxx-xxxx-x1zz Change the 1 to 0

 

[PlatinumOwner]

I believe I found it, this needs to be set in the PDM and DDM in addition to the two settings in the BCM. I also have a code to enable the Global Close option in the menu for Sync 3.4 and maybe the instrument cluster too.

740-02-08
xxxx-xxxx-x1zz Change the 1 to 0

741-02-08
xxxx-xxxx-x1zz Change the 1 to 0

Global close option for Sync 3.4(APIM) vehicle settings menu
7D0-09-01 xxxx-x*xx-xxzz - Change A to E

 

[iTonyp]

Ok will try this maybe this evening.

 

[iTonyp]

Ok... tried all the new settings. The DDM setting changed from 1 to zero and PDM the same. Did not enable global close. When trying to change the PDM settings, it would not write. The DDM settings did take. It did create a couple bugs when trying to open globally the driver window went down a few inches then stopped. The passenger widow went down all the way. And the auto up on the driver window now does not go up automatically. The passenger does work. Put settings back to original settings still does not work for the DD. The APMI did show the new toggle for global close.

Any idea what may have caused the auto up to stop working?

exact message when trying to write in the DDM Service procedure has been interrupted

 

[Mikey*TX]

I can attest that bambi mode now works. Made the change today. As the factory fogs are more a garnishment than functional, I may simply wire them so that they strobe when turned on.