Tommyboy79
New Member
- Joined
- September 28, 2020
- Messages
- 9
- Reaction score
- 0
- City, State
- W,va
- Year, Model & Trim Level
- 2001 ford explorer
Ok. I have 2003 PCM from a Ford Ranger 4.0 and I also have a 2001 Ford Explorer 4.0 motor wiring harness.
I have rewire the 2001 wiring harness to the 2003 PCM. The trouble am having is one wire to the PCM it is
__________________________________________________ _
82 ---------- 1017 (BK/WH) ------------ Check cap indicator lamp
__________________________________________________ _
Then it runs to the C110 black plug to the motor wiring harness to.
__________________________________________________ _
40 ------- 911 (WH/LG)
__________________________________________________
41 ------- 1017 (BK/WH) ----------- Check cap indicator lamp
__________________________________________________
42 ----------- J37
_________________________________________________
But the 2001 Ford Explorer wiring harness don’t have that wire and the C110 Plug for the motor wiring harness.
Don’t have that wire. So does have this instead.
__________________________________________________ _
40 -------------- 911 (WH/LG)
__________________________________________________ ___________
41 ------------ 904 (LG/RD) ---------------- "Generator/Battery indicator, control"
----- OR ----
1017 (BK/WH)
__________________________________________________ ____________
42 ---------------- 36 (YE/WH) ------ "1 Voltage supplied at all times (overload protected)"
__________________________________________________ ____________________
And I have C102a or b plug to the Generator
__________________________________________________ __________________
1 ---------------- 36 (YE/WH) ------ "1 Voltage supplied at all times (overload protected)"
__________________________________________________ __________________
2 -------------------------- Not Used
__________________________________________________ __________________
3 --------------------------------- 904 (LG/RD) ---------------- "Generator/Battery indicator, control"
__________________________________________________ ________________________
I hope you all can umderstand what i am trying to tell you.So there is my problem am having what should
I do for the ‘1017 (BK/WH) wire’ for the ‘Check cap indicator lamp’ ?
Like I said the 2001 Ford Explorer wiring harness doesn’t have Check cap indicator lamp wire in it at all…
I have rewire the 2001 wiring harness to the 2003 PCM. The trouble am having is one wire to the PCM it is
__________________________________________________ _
82 ---------- 1017 (BK/WH) ------------ Check cap indicator lamp
__________________________________________________ _
Then it runs to the C110 black plug to the motor wiring harness to.
__________________________________________________ _
40 ------- 911 (WH/LG)
__________________________________________________
41 ------- 1017 (BK/WH) ----------- Check cap indicator lamp
__________________________________________________
42 ----------- J37
_________________________________________________
But the 2001 Ford Explorer wiring harness don’t have that wire and the C110 Plug for the motor wiring harness.
Don’t have that wire. So does have this instead.
__________________________________________________ _
40 -------------- 911 (WH/LG)
__________________________________________________ ___________
41 ------------ 904 (LG/RD) ---------------- "Generator/Battery indicator, control"
----- OR ----
1017 (BK/WH)
__________________________________________________ ____________
42 ---------------- 36 (YE/WH) ------ "1 Voltage supplied at all times (overload protected)"
__________________________________________________ ____________________
And I have C102a or b plug to the Generator
__________________________________________________ __________________
1 ---------------- 36 (YE/WH) ------ "1 Voltage supplied at all times (overload protected)"
__________________________________________________ __________________
2 -------------------------- Not Used
__________________________________________________ __________________
3 --------------------------------- 904 (LG/RD) ---------------- "Generator/Battery indicator, control"
__________________________________________________ ________________________
I hope you all can umderstand what i am trying to tell you.So there is my problem am having what should
I do for the ‘1017 (BK/WH) wire’ for the ‘Check cap indicator lamp’ ?
Like I said the 2001 Ford Explorer wiring harness doesn’t have Check cap indicator lamp wire in it at all…