SanSebek
Active Member
- Joined
- July 18, 2021
- Messages
- 60
- Reaction score
- 13
- City, State
- Brzeg
- Year, Model & Trim Level
- 2015 PIU
Hello,
I wanted to program a new remote control according to the instruction manual, but after inserting the key in the ignition and cycle eight times rapidly the door does not lock/unlock.
(The lock / unlock buttons on the doors are working)
I have only one original key without a remote control (as in the photo), is it possible that I do not have the control unit or it has been disconnected?
I will mention that my immobilizer does not work in the car, at the locksmith I made two keys with remote controls and ... surprise ... I started the engine before we programmed the transponder chip; p
Now I do not know if it is possible at all.
Thanks for any hint
I wanted to program a new remote control according to the instruction manual, but after inserting the key in the ignition and cycle eight times rapidly the door does not lock/unlock.
(The lock / unlock buttons on the doors are working)
I have only one original key without a remote control (as in the photo), is it possible that I do not have the control unit or it has been disconnected?
I will mention that my immobilizer does not work in the car, at the locksmith I made two keys with remote controls and ... surprise ... I started the engine before we programmed the transponder chip; p
Now I do not know if it is possible at all.
Thanks for any hint