Auto & Truck Parts For Sale

wood effect radio surround from a 2000 Limited, doesn't have a 4x4 switch spot on it. $15 plus shipping Si

V8 Limited Radio Bezel wood trim effect. Excellent condition, $70 shipped Si

I'm not sure what it's "made" for, but it's got a spot on the passenger side for some tanks. EDIT: Price Drop!! Asking $150 obo.

$650 Shipped. No Gaskets or Header Bolts. 0902162150 by Centaurus5.0 posted September 10, 2016 at 10:50 PM 0924161625a by Centaurus5.0 posted September 25, 2016 at 1:46 AM

Selling my used TM headers. These are meant for a 98-01 with the EGR bung in the passenger side header. They aren't in the best shape, there is a pretty sizable dent in one of the tubes of the passenger header, which has been there since I bought them from another member here, and a couple of small dents in other areas on both headers. Coating is also chipped and missing in several spots with some minor rust. They work perfectly fine and completely seal despite their condition. I will get some pictures in the next couple of days, and I will be removing them from my truck this week. Will include new Remflex gaskets for mating to the heads, and I also have a new gasket I also got from Remflex that I was going to test fit on the...

SOLD! Just like the title says. $400.00 local pick up in the St. Louis area. Tires are in great condition, low miles, and over 80% tread. These have the bead guard with raised white letters, 3ply sidewalls, awesome winter tire and all season traction. Perfect for a daily driver, as they run smooth and are quiet on the pavement. Teardrops are stock Explorer 15"x7" 5 on 4.5" pattern I will throw in a 5th matching spare tire on a spare steel wheel for free. Only pics I have off hand at the moment, but they came off the rig right after these were taken for a set of 33" MT's. I will update this with some new ones asap.

Sold my 3.5 NA Explorer XLT a couple months ago, and unmarried this from my truck before trading in. Buyer will have to pay to marry this to their truck, as well as whatever tunes you want to load, so just an FYI. Work with LMS on what it'll cost to get you tuned up, and I'll try to save you some $$. I don't know what that cost is going to be for you, so I'll start at $150 shipped lower 48 - if that's too high, I'll try to work with you. I know I spent ~$575 for this SCT with 3 tunes.

I have the following USED items for sale. All are located in McVeytown, PA and prices do not include shipping. All parts came off our '66 289 and have under 15k miles on them. They are all designed to fit V-8 260-302 Motors Summit Racing SUM-G3520 chromed oil pan. Sells new for $57. It's in decent condition with some surface imperfections and a couple scrapes. Price: $25 Melling M68 oil pump. Sells for $28 new. Price $15 Accel Billetproof Distributor with tach wire and Cap. Sells for $266 new. Price $75 Accel SuperStock Coil. Sells for 37 new. Price $15 Carter aluminum Street Pump #60454. It's a little dirty and could use a good cleaning/polishing. Flows 120GPH @ 8PSI...

I bought these, and I didn't end up needing them. Too late to return. These are Brand New Dorman Control Arms with Ball Joints. The Uppers are One Piece Designs, if you have the 2 piece uppers, thats ok, these will fit. These control Arms are for an Explorer with & without 4WD. Part Numbers are: 520221, 520222, 520223, 520224. You can look these up at Advance, Autozone or Pepboys, you will easily pay $500+ for all 4 control arms. My loss is your gain. No Calls After 9pm. 856 906 8698. $300 shipped anywhere in the US via Gifted Paypal or $250 for local pickup NJ, 08107 521221 520222 520223 520224

I have a 4.0 non egr and a 5.0l upper with either elbow and cover plaque. I am offering them in a custom powdercoated finish of your choice.. 100.00 plus shipping and exchange for the 5.0 ( add 15.00 if clear is needed) 65.00 plus shipping and exchange for the 4.0 ( add 10.00 for clear if needed) I am offering this exchange service to minimize your downtime, and help your install. I will require a commitment before starting work, as I cannot do your custom color and expect someone else to like it should you decide you no longer want it. Once this stuff is there, changing colors is a chore. For color ideas, please refer to my Photobucket album here...

I'm selling my Ultra Polished Aluminum wheels. They are 15x10 and are 5.4.5" bolt pattern. They will either need a really good polishing or painted, I was going to paint them if I decided to keep and run them on another rig. Used for three years. I had them listed for $200 plus shipping but dropped the price down to $150 plus shipping. SOLD !!! This is not my truck in the picture but you can see what they look like on a vehicle polished up... You can contact me by pm, email or calling me at 412-606-5029, Jerry.

I have a pair of brand new U-bolt and shock skid plates specifaclly made for the rear of a 1st or 2nd gen Explorer. They are 1/4" plate and protect your u-bolts and raise the shocks up a few inches. These are made for 5/8" U-bolts which are bigger than the stock ones so if you dont have 5/8" ubolts now would be the time to upgrade. These may cause shock to swaybar mount interference so shocks should be mounted body side up or if you have removed the rear swaybar it is a non-issue. Also note these raise the shock up 2"-3" so shock length could be an issue depending on your lift and shock length. Current price for a pair is $215 shipped to the US due to the high cost of steel right now.

Hi-Lift mounts SOLD Set of 4 never used or installed U-bolts. They measure 9" long x 3"ID x 1/2" thread. No washers or nuts. PayPal me $10 and they are yours. Located in La Quinta, Calif.

SOLD $80 shipped. dont know the brand, pulled off my 92 f350, 8x6.5". im guessing not hub centric?? all lugnuts are included. spacers are aluminum. they are 1.5" thick

I am selling all my IFS parts making way for the big SAS! I have most of the IFS taken out of the truck. Everything is for sale if anyone can use some of the parts to better their rig. I'll post some pictures of all the parts. Main parts that I hope someone can use is the EBC brake rotors and brake pads. And the Timken bearing hubs that only have 20,000 miles on them. Also the Half Shafts have 20,000 miles on them as well. Knuckles are in perfect condition. Upper A-arm's are in good order and ball joints are good. Lowers have bad ball joints but if anyone needs them feel free to make an offer. Parts for Sale: Front EBC brake rotors and 6000 series pads - SOLD Rotors GD7084 Is the rotor's part # Pads DP61199 Is the Pad part # Pads...