Auto & Truck Parts For Sale

Soon I will be moving....or at least that is the plan. I have a bunch of crap, that I would rather see go to a good home, rather then bicker on a price or just throw away. So below are items that are Free.....you just need to pay shipping. And a donation is always welcome.;) The only other I ask is you give others a reasonable chance.I don't want see one person saying I'll take it all, so you can go somewhere else and hock my stuff. I'll burn it all first:dead: 2006-2010 4.0 Explorer K&N filter Sport Trac RC car. Missing controler. 1/10 scale 1995-2001 xlt chrome grill 2002-2010 4 door tan cargo liner 2002-2010 4 door tan cargo retractable cover. the Club steering wheel lock X2 with keys 1995-2000 2dr sport fender flair 2004-2008...

Up for sale is a few good items, in need of a new home. Will ship to the lower 48 states only, or you can pick up. Will use USPS flat rate when applicable. NIB- Dorman leaf spring shackles. Comes with new hardware. Set of two (2)- $65 shipped. *SOLD* NIB-91-98 2wd/4wd Daystar urethane body bushings, full kit, direct replacement. - $100.00 + UPS shipping in original box, or USPS Large flat rate box. Big difference in $! NIB- Eibach Coil over springs. Pair of 12.00"x2.50"x650#. - $80.00 + UPS shipping Used set of 4.0L OHV good hydro lifters, non-mushroomed pushrods, Rocker Rails, and head / intake bolts. Lifters are not shown as they are stored in a container of trans fluid presently, but will be drained for shipping...

Alright folks, two years ago a bought a wrecked 93 Eddie Bauer with less than 30,000 original miles on the clock. It was garage kept for its running life and has been garage kept by me. It’s my personal donor vehicle, but I run a Sport with grey interior, so a four door with tan interior isn’t that helpful for me. If you need tan interior first gen parts, hit me up. Carpet, dash, front and back seats, door panels....for the most part, if it’s tan, I’ve got it. I’m a bit less likely to have quality passenger side or rear parts. Let me know what you need and I’ll get you pics.

For Sale: This is an old school Ranger / Bronco II conversion part. Advanced Adapter transmission adapter plate for the Toyo Kogyo to a v8 bellhousing. See instructions in link. https://www.therangerstation.com/tech_library/pdf_documents/712541.pdf I only have the adapter plate, no hardware or bearing retainer. The hardware and bearing retainer are still available from AA. $25 obo

I recently built some extended radius arms for a TTB but messed up and made 2 left side mounts. That meant I had to make 2 right side mounts and now the extra pair is up for sale. These are fully welded and fit the D35 TTB beams. all you need to do is add 2"x.25" DOM tube and a gusset of some sort. For under a 3" lift the tube is best on the bottom and for over a 3" lift the tube is best welded to the top and the gusset on the bottom. $60 + shipping (around $14) 1st 2 pics is what you get, last pic is how I finish them up for an idea.

I have a few Moog uppers that I have been holding on to and realized I don't need this many. All the joints are nice and tight, but the boots are ripped on every one except the one painted black. Also have a set of new in the box replacement ball joints I have no need for. Prices INCLUDE shipping to the lower 48. Left upper - SOLD Right upper painted - $30 Other right uppers - $25 New in box Moog replacement joints - SOLD

Some left over parts from my Dana 35 to dana 44 swap. One pair of manual locking hubs includes the spindle locking nuts, new o-rings, and new decals for the knobs. I also have one pair of Dana 35 non ABS spindles that are in good shape. Locking hub kit $100 plus $15 shipping and $50 for the pair of spindles plus $15 shipping. I

like the add says, 4406 shifter and linkage. what is in the picture is what you will get. $100 plus shipping to lower u.s.a. and cross canada. any place else, contact me and we will work on a price.

Hi, I took the body off of my 1996 explorer 4 door. It was a 4.0 6 cylinder. The frame has some surface rust but no rot. The frame has the front suspension complete, 3.73 gears. Rack and pinion steering, front driveshaft, transfer case. Gas tank. The rear springs are there, rear axle has been removed. I thought someone might like to save a rusted out frame. Any interest? Make an offer, cheap! Hayte to scrap it. Located in greenwood lake,ny 10925

Vroomzoomboom found a crack. There was no audible exhaust leak I was aware of, although the cam/lifters were noisier than stock because of the higher lift/duration 422 cam. At your own risk. Because of the crack, I'm thinking $50.00 + shipping.

Insurance totaled my 2009 EB V8 4X4. I pulled the Crutchfield sourced: (and complete in original boxes, used for less than a year) Thought I'd give all of you 1st dibs! 650.00 for all + shipping or can meet/pick up in the Atlanta area. Kenwood Excelon DMX905S - HD Radio, Wireless/Wired Android Auto and OK Google, Wired Apple CarPlay and SIRI Kenwood Excelon DMX905S Digital multimedia receiver (does not play CDs) at Crutchfield Kenwood DRV-N520 Dash Cam (plugs into the DMX905S) Kenwood DRV-N520 Drive Recorder Dash cam for use with select Kenwood video receivers at Crutchfield iDatalink Maestro RR Interface Module with HRN-RR-FO1 Factory Integration Adapter, Antenna Adapter, Metra Dash Kit Crutchfield built plug and play wiring harness...

Thanks all. Everything has found a new home. As I noted in the vehicles for sale section, I've had to give up on my long-time dream to convert my brother's 2001 Explorer Sport into a DD / trail and overlanding rig. I explain more of why in that thread, and you can find lots of background on the project in this thread or by checking out anything I used to post back in the day. The upside for anyone looking for some parts and upgrades is that I have some good stuff I really need to clear out before I move, including some stuff that's never been out of the box. Here's Part 1 of the list (Part 2 is here), with some links to more info where I could dig them up. $100 -- ARB Ford 8.8 differential cover, black, with LubeLocker reusable...

I've parted out three 1st generation Explorer Sports and have glass, exterior trim, and interior parts for sale. Very reasonable prices - just hoping to help keep these great vehicles on the road. Contact me for anything you need. You'll be surprised by what I have!

I bought this from a guy who was parting out a limo. I'm never going to use it so it's up to you to put this to work.

Hey guys, I am selling my flashpaq handheld tuner that i was using on my 99 ford ranger xlt with the 4.0 OHV engine. i dont have any need for it as i am currently in the process of doing an engine swap. It's in great condition and was also unlocked before the harness and engine were pulled. I am asking $100 OBO for the tuner. I also have my auto 5R55E transmission to get rid of. it was working great while it was inside of the truck but now just taking up space. Asking $100 for the transmission, it has no problems what so ever. shoot me a DM if interested :) willing to ship on buyers dime.