Auto & Truck Parts For Sale

Computer / ECU / ECM from a 94 Explorer with Automatic. Good for a spare or core return, etc. Looks in good shape, I pulled it out before an Explorer was scrapped. It was in running condition so computer should be good. $32 shipped, OBO! part # f47f-12a650-mb Also have a 91 and 93 ecu for automatic trans as well. Make offers before I scrap them

Selling a NIB set of Go Rhino Tail Light Guards for 98-01 Explorers and Mounties. Perfect condition and still in the box. Price is $125 with shipping to anywhere in continental US. Willing to negotiate slightly. Edit: Price reduced to $75.

Decided against doing a SAS on the Bronco so clearing out some parts. First up are a set of mid 80's fill size Bronco radius arm mounts. Some surface rust but still solid. $80 for the pair. Also selling the Early Bronco Dana 44 I was going to put under the BII. It is SEMI COMPLETE. You will need everything after the knuckles (hubs, brake setup, lockouts). Here is what comes with it: Axle housing with freshly installed Yukon 4.56's Stock radius arms with the rubber wedges Stock axle shafts - need u-joints Stock tie rod setup - worn out, for mock up use only Stock Knuckles Asking $250 for the axle. Make me an offer. Located in 11722 which is Suffolk County, Long Island NY. Willing to meet in tri-state area within reasonable distance.

I have a new pair of heavy duty 4.0L motor mounts up for sale. Custom fabricated to the OEM mount specs so it is a direct bolt in re-using your existing hardware (nuts). They use a polyurethane bushing to isolate the motor. Replaces the Anchor and other brands part # 2641 and 2643 mounts Fits the following years of Rangers, Explorers and Bronco IIs Only: FORD BRONCO II (1986 - 1990) FORD EXPLORER (1991 - 1994) FORD RANGER (1986 - 1997) MAZDA B3000 (1994 - 1996) MAZDA B4000 (1994 - 1997) MAZDA NAVAJO (1991 - 1994) $155 shipped for the pair.

Ideally, when looking for parts, I want to find the ones that a seller obtained for their own use...but then unexpected circumstances dictated a change in their plans That's the case with these Light Stone Explorer interior door panels. For the last three months I've been tirelessly searching the internet and visiting every Pull-A-Part within a 250 mile radius of my home in order to find good interior plastics along with 4 (four) interior door panels for my newly acquired 2007 Sport Trac. In that search,I found this NOS Right Front passenger side interior door panel in Cincinnati and the Left & Right rear interior door panels were discovered in an LKQ yard in Fort Wayne, IN. And then quite by surprise I found 4 (four) NOS '06...

Thanks for looking I am offering a set of 1/2" thick laser cut and drilled bumper build brackets for Ranger. ( holes will not work for explorer without redrill) for building your dream rear bumper. These are heavy heavy, will probably fit into a flat rate shipping box to give the mailman a workout 25.00 plus shipping

Have a shift boot, bezel and floor grommet from a 91 Explorer 5 speed w/manual shift t-case. The bezel is cracked in the middle (could be plastic welded) and the t-case boot is loose. These are VERY hard to find anymore. $40 + Shipping 1475188690810 by boominXplorer posted September 29, 2016 at 6:39 PM1475188722603 by boominXplorer posted September 29, 2016 at 6:39 PM1475188769503 by boominXplorer posted September 29, 2016 at 6:39 PM1475188793873 by boominXplorer posted September 29, 2016 at 6:39 PM

some small scratches that are not deep, and chances are you wont see them when they are on the truck. $75 shipped to the lower 48 and across canada

Ford brand bug shield. Asking $30.00 plus shipping or central Florida pick up. Thanks.

SOLD SOLD SOLD! I have a Warn Trans4mer Brush Guard and winch mount for a 1st gen Explorer up for sale. This is no longer made and somewhat rare as I haven't seen too many of these. It bolts around the stock bumper to the frame and mounts a winch to the front. Your air dam needs to be notched for a bracket to fit through. It needs new paint and it does have a few dings and trail scratches. At some point it appeared to have a low speed encounter with something on the driver side as it was slightly tweaked. I was able to straighten it out for the most part. 95% + of the hardware is there but I may have misplaced some washers, bolts or nuts while taking it apart. It all bolts together so it will break down for shipping via UPS. $SOLD...

From 99 XLT right front window glass. Good condition. Asking $35.00 plus shipping or central Florida pick up . Thanks .

Chrome grille, good condition no breaks or cracks. See pictures for finish condition. Asking $40.00 plus shipping or central Florida pick up. Thanks.

Good straight factory aluminum Explorer 15 x 7 mag style wheel. See pictures for condition. Asking $40.00, plus shipping or central Florida pick up. Thanks .

I have a cluster removed from an 03 Explorer sport. It has 88k miles and is in great used condition. It was fully tested before removal. $60 Shipped in lower 48 20160926_142231 by boominXplorer posted September 26, 2016 at 2:24 PM20160926_142259 by boominXplorer posted September 26, 2016 at 2:24 PM1474914288096 by boominXplorer posted September 26, 2016 at 2:24 PM

Two good condition bumpers, with mounting hardware. See pictures for flaws. Asking $85.00 each + shipping or free local pick-up in central FL. Thanks