Official ET/MPH List

PLEASE ONLY PM ME WITH YOUR NEW OR UPDATED TIMES/MODS. If you only post your mods/times they will most likely be overlooked and not added.

This is the official ET/MPH list. PM me any relevant info on your run, aka time slips and videos. Also list your mods, try and follow the format you see below. If you dont have the time to follow the format, ill organize your info, but any help is appreciated.

Suggestions are welcomed. We will use only vehicles relevant to this forum. I only used 1/8th on my personal run because I have not hit the 1/4 yet, but send what you have.

Lets get a list going guys and gals... Stock, modified, whatever!!!!

Naturally Aspirated

1) Turdle ( aka jtsmith) :
14.819@89.79
R/T .626
2.073 60'
9.375@73.08 1/8
6.014 330'
12.310 1000'.
Mods: A(1998 Mountaineer),E ( Professional Products Typhoon),F ( Edelbrock performer with a bit of touching) FF(347ci) G ( FMS x 303) J ( Torque Monster Big exit, Magnaflow cats, rear cats gone, magnaflow and hooker mufflers, mac tilpipe) ,K ( SCT by James Henson www.hensonperformance.com ), S ( 4.030 bore X 3.400 stroke) , X ( 91 octane), AA(part-time 4x4 4406),DD ( art carr 3000 RPM flash), FF ( lightning maf, KN filter, home made intake tube),XX The other guy distracted me


2)Limited02

A) 2002 Explorer 4x4, I) Flowmaster 70 w/2.5" single exhaust, K) SCT3 from www.hensonperformance.com, M) 275/45/20's, FF) 4.6L, ZZ) Weight Reduction(2nd/3rd row seats and spare.)




Timeslip(#971): from 11-20-2010
-R/T .407
-60' 2.163
-330' 6.220
-1/8 9.655
-MPH 71.58
-1000' 12.623
-1/4 15.145
-MPH 88.77
3)Techieman33-- r/t 2.48' / 60' 2.32 / 330' 6.498 / 1/8@9.948@71.25mph / 1000 12.959/ 1/4 15.517@88.04
Mods: A(2000 Mountaineer),E(phenolic intake spacer),J(custom flowmaster 50 series exhaust,torque monster headers),AA,EE(MAC CAI),K(xcallII www.hensoneperformance.com ),FF(302ci 5.0 pushrod)

4) carguy3j: R/T -- .288 / 60' 2.283 / 330' 6.651 / 1/8 10.211@69.00mph / 1000 13.280 / 1/4 15.876@86.62
Mods: A (1999 Explorer XLT 4dr), FF (4.0L-SOHC), AA (Auto, a4wd), K (SCT Xcal3 w/ custom 93 octane tune-Henson), EE (K&N FIPK Cold Air Kit), ZZ (no spare tire and rear cargo mat removed, and approx 1/8 tank of gas)

5) cheesypoofs: 10.282@67.375 1/8th / 0.272 reaction / 2.230 60'
Mods: A) 98 XLT B) 4700 C) 76* I) MAC catback K) X3 and 93 street tune from www.hensonperformance.com EE) MAC cold air intake FF) 5.0

6) 1996exploererxlt: 16.627@82.34, R/T .089 / 2.396 60' / 10.680@66.14 1/8
Mods: A(00 Mountaineer), C(85-90*), E(Mac Intake), I(Flowmaster 40 series dual exhaust), M(30x9.5 Wranglers), AA(AWD)

7) dpxtwo: 16.054@86.78, 60 ft -2.361 / 330 -6.742 / 1/8 -10.334@68.03 / 1000 -13.446
Mods: A (2006 Explorer EB V8 2wd), C (1,000ft/76 degrees/43%), I (FM 50 SUV, tube resonator), X (Pump Gas), EE (K&N, Custom Ram Air)

8) anti_rice_guy: 16.84@79.91/2.367 60'.
Mods: A(2006 explorer xlt),EE(k&n drop in),FF(4.0 v6),AA(awd)

9) cdw6212r: 17.16@82.2/11.18@66.7 1/8th/2.83 60ft
Mods: A(1998 Mountaineer AWD 5.0), D, M (255/60/18's), ZZ(zexel-torsen diff, big sway bars, 12.7566x1.25'' rotors)

10) turboexplorer: 17.948@73.93 / .129 RT / 2.478 60' / 14.925 1000' / 11.402@60.27mph 1/8th / 7.319 330'
Mods: A(98' Explorer XLT), B(5,300), D, M(31's), AA(AWD), FF(5.0)

--------------------------------------------------------

Power Adder



1) mounty03: 12.433@109.2mph / 7.935@88.28mph 1/8th / 1.74 60'
Mods: A (2003 Mountaineer), B (4860 lbs.), C (257 Ft./78*/73%), E (HPS Hardball'r Intake), F (Mustang GT), G (Mustang GT)
I (Stock manifolds with 3" exhaust), J (3" Magnaflow muffler), K (SCT PRP tuned on street), P (MMR Street Mod 800 shortblock)
U (Precision 6176 Turbo, 15 psi), W (Snow Performance), AA (5R55W trans, AWD), EE (Blowthrough), FF (4.6 SOHC)


2)
4pointslow: 12..086@105.20mph 1/4 mile / 8.121@83.51mph 1/8th mile / 1.796 60' / RT .102
Mods: A (1998 Explorer Sport), B (4430 lbs), C (145 FT/40*F), E (Bansheesupercharger.com lower intake / LFP single Blade ThrottleBody), F (Supersix Motorsports), G (Supersix Motorsports), H (JBA shorty headers), I (2.5 inch Magnaflow high flow Cats and custom pipes/Flowmaster super 44 mufflers 2.5inch in and out), K (SCT Pro Racer Software/Xcalibrator4), N(Black Magic Extreme 180), T(Intercooled and modified GT500 H/M122 / 3.3 inch pulley /18 psi), W(Snow Performance), X (93 oct pump gas), Z (Custom Liquid Intercooler by Bell Intercoolers), AA(Automatic 4WD(Control Trac), 4.88 Differential Gears F&B), DD(Factory Converter 2900Stall), EE(GT500 Maf sensor,housing,airfilter/Home Depot 4 inch sewer pipe), FF(stock bottom end 4.0 SOHC V6 with ARP head studs), ZZ(2003 Explorer Sport spindles and 12 inch rotors, On board PC for tuning,monitor in sunvisor)


3) jah81592: 8.27@84.53 1/8th.
Mods: A(1998 x sport),B(4,000),C(bama dragway 40*),E,G,K(henson custom tuning via sct livewire),M(stock steel wheels and mickey et drags 26x8.5-15,225/70-15 front steel wheels all the way around),J(dynomax race bullet muffler no cats),U(single 8psi)W,CC,ZZ(5r55e),FF(sohc 4.0 v6) VID:http://media.putfile.com/827-Turbo-Explorer

4) Jakee: 13.4304 1/4 [MENTION=234733]10[/MENTION]1.58 / .4968 Reaction / 2.0716 60' / 8.5980 1/8 @81.48
Mods: A (2001 Explorer Sport), B (4000 LBS), C (NA), E (Stock), F (Stock), G (Stock), J (JBA Shorties, Borla ProXS, 3" single), K (SCT PRP personally tuned), N (Yes), O (No), U (STS 60-1 T04E @ 9LBS), X (YES), AA (2WD), DD (Stock), EE (Custom Blow through), FF (4.0 SOHC)

5) rocket 5979 AKA KBX: 13.63@98.93/1.96 60'/8.72@80.87 1/8th.
Mods: A(2003 Explorer 4D),I,K,M,N,T(Kenn Bell 2.2, 9psi),X,CC,EE,XX(wheel spin off launch)FF(sohc 4.6 v8) VID: http://videos.streetfire.net/video/a7fe0148-0a0d-473d-90be-9812002415f7.htm

6) awdrocks: 9.015@78.3 1/8th/2.003 60'.
Mods: A(2002 Explorer 4D EB),B(4,856),C(1,200/78*),F(Fox Lake Stage II),G(Comp 262's),H(Shortys/2.5 true duals), K(xcalII),M(20x10/295-40-20's),N,O,Q(304ci),T(Eaton m90, 9psi),X,BB,EE,XX(two intake vacuum leaks, very detuned from timing, short shifting),FF(sohc 5.0 304ci)

--------------------------------------------------------

Performance Modifications and Vehicle Info

A) Vehicle and Year
B) Race Weight w/Driver
C) Elevation of Track/Temp/Humidity
D) Completely Stock
E) Intake Manifold
F) Cylinder Heads (Brand)
G) Camshafts
H) Long tube or Shorty Headers/Stock Catback
I) Stock Headers/Aftermarket Catback
J) Full Aftermarket Exhaust (Headers to tips,specify)
K) PCM Modification
L) Lighter than Stock Wheels and Tires (Specify)
M) Heavier than Stock Wheels and Tires (Specify)
N) Electric Fan
O) Electric Water Pump
P) Built Stock Displacement Shortblock
Q) Big Bore (Specify Displacment)
R) Stroker (Specify Displacment)
S) Big Bore plus Stroker (Specify Displacment)
T) Supercharger (Specify Brand/Size/Boost Level)
U) Turbocharger(s) (Specify Brand/Size/Boost Level)
V) Nitrous (Specify Shot Size/Dual or Single Stage)
W) Methanol
X) Pump Gas
Y) Race Gas
Z) Ice Box
AA) Driveline, AWD / Part-Time 4X4 / 2wd
DD) Aftermarket Stall Converter (Stall Speed)
EE) Filter/CAI/Snorkel Mod
FF) Motor
XX) Handicap Disadvantages (Specify)
ZZ) Other (Tranny swap eg;5r55w to 4R70, IRS to Solid, V6 to V8 swap etc...)

 

[Limited02]

Mounty03- Could you elaborate more on your setup? When I recently achieved my 15.22, I had taken the seats out and the fr driveshaft/swaybar. Are you full weight or what? My next goal is to find some drag wheels/tires to put on and see how much that helps.

 

[turboexplorer]

Mounty03- Who did your trans if you dont mind me asking?

 

[mounty03]

Mounty03- Could you elaborate more on your setup? When I recently achieved my 15.22, I had taken the seats out and the fr driveshaft/swaybar. Are you full weight or what? My next goal is to find some drag wheels/tires to put on and see how much that helps.

The only thing removed is the 3rd row seat. It was 4860# with me in it the last time I had it on a scale.

The trans was built by Dirty Dog Performance.

 

[turboexplorer]

Sweet thank you!

 

[CDW6212R]

The only thing removed is the 3rd row seat. It was 4860# with me in it the last time I had it on a scale.

The trans was built by Dirty Dog Performance.

Very good, Alan is great to deal with. I take it he built the torque converter also? I spoke with him about making a better TC when I can work it in.

 

[Jakee]

This is perfect weather for good times at the track. Too bad mine is not done and will be awhile before complete. Darn economy.

But Mounty - You make us explorer dudes proud. I hope you make 11's soon.

 

[htrdlncn]

We just got back from Little River Dragstrip .
Got in 8 runs .
My best 3 runs of the night were all 16.0s
I got a 16.09 a 16.08 and a 16.005 but I just couldnt get that 15.999999 , Arghhh.. Mph was 82 - 83mph all night. Not great but not bad for a basically stock 4200lb 4x4 with a V6.
Next time I will run the nitrous and see what difference it makes.
Good thing is I only lost 3 out of the 8 times I ran.
Ill scan in my best run of the night timeslip sometime this weekend.
goodnight!

 

[Limited02]

Sounds like fun!!! Congrats on the times and I know you have a 15.99 in you Can't wait to see what you run with the nitrous!

 

[techieman33]

That 15.99 haunted me for a long time, It took a few trips to the track to lose that last couple of hundredths.

 

[htrdlncn]

Probably would have gotten it if I didnt have an almost full tank but track
was far out enough I was worried about not having enough gas to get home.

 

[htrdlncn]

best 3 runs of the night:

 

[Limited02]

htrlncn- Thanks for the timeslips because when you first posted where you ran at, I couldn't find "Little River Dragway." But I did find "Temple Academy Dragway," and was able to look up your DA for your best run and get a corrected time of what you should have ran. Says you should have been about a 15.83 @ 84.621 in the 1/4 under better conditions.

When I ran my new best a few weeks ago, I went 15.22 and the corrected time said I was supposed to be near a 14.6. Our DA was much higher than yours so.... Here is the link for you to play around with

http://www.dragtimes.com/da-density...057&mph=83.69&correctetmph=Correct+ET+and+MPH

 

[htrdlncn]

It was renamed a few years ago , they are the same place.
http://www.littleriverdragway.net/

 

[awdrocks]

Sorry I have not been back in a little while. I'll get you up. My eyes are closing shut right now but i'll honor your slip. Keep it up!

 

[Limited02]

awdrocks- How's the new combo coming together? Have you started a new build thread I don't know about?

 

[68amc]

I ran my 1993 5 speed, 4wd sport. It has 186,x.. miles on it, no LSD, and a collapsed lifter on cyl 6, weighed in a 3445 with 150lb driver. Took it to Maple Grove Raceway in PA. It was completly stripped and A/C compressor removed. I ran 3 passes with the best being 17.17 @82 mph. I couldn't get traction to save my life and my R/T was horrible as it was my first drag ever. I did beat a 2001 5 speed explorer sport, a 2.0 VW golf, a 1994 Jeep cherokee, a 1987 dodge ram 150. I had alot of fun.

 

[blk mk8]

i wish i had time slips but the truck does not run yet,i think low 10s and then high 9's later in the year.

 

[awdrocks]

Guys and gals,

I am very sorry for the inconsistency on this thread. I have been overwhelmed with work and another project I have underway. A 1990 AWD Talon

Please pm me if I have not updated your numbers.

Thank you

BTW I am cooking something that should land me in the 750-800whp range.

 

[CDW6212R]

Guys and gals,

I am very sorry for the inconsistency on this thread. I have been overwhelmed with work and another project I have underway. A 1990 AWD Talon

Please pm me if I have not updated your numbers.

Thank you

BTW I am cooking something that should land me in the 750-800whp range.

Alex, let me know if you need a spare turbo for that Talon? I bought one many years ago that is supposed to be a manual version, and slightly ported. It's good to hear from you, how is that TFS headed engine coming along? Regards,

 

[awdrocks]

Alex, let me know if you need a spare turbo for that Talon? I bought one many years ago that is supposed to be a manual version, and slightly ported. It's good to hear from you, how is that TFS headed engine coming along? Regards,

Thanks Don.

What kind of turbo? I have a 50 trim on it right now on the stock motor. I'm building another motor on the side and that will sport a Holset hybrid HX35/40. First goal is 600awhp on pump and meth, prob around 38psi.

Explorer build is moving along but very slowly. As soon as I get this Talon done im going all out on the X.

How is your ride?