frankyd
Member
- Joined
- July 3, 2011
- Messages
- 20
- Reaction score
- 0
- City, State
- pittsburgh area
- Year, Model & Trim Level
- 97/97 Explorer OHV VIN X
i have a 97 ford explorer vin X 4.0 ,
i did a complete tare-down of my engion to just the block and rebuilt it from there, it dosent knock when i turn it over ( it sounds like it should ).
i just cant figure out why it turns over but wont start, could my vacuum lines be placed wrong (i figured that it should start then work the bugs out) i also don't have the muffler hooked up (i thought that it shouldnt matter about back pressure at this rebuild stage) everything ran fine before (except that some bearings spun hence the rebuild lol) im at a loss. any questions i will answer any help is very appreciated thank you for your time
sincerely Frank D
i did a complete tare-down of my engion to just the block and rebuilt it from there, it dosent knock when i turn it over ( it sounds like it should ).
i just cant figure out why it turns over but wont start, could my vacuum lines be placed wrong (i figured that it should start then work the bugs out) i also don't have the muffler hooked up (i thought that it shouldnt matter about back pressure at this rebuild stage) everything ran fine before (except that some bearings spun hence the rebuild lol) im at a loss. any questions i will answer any help is very appreciated thank you for your time
sincerely Frank D