Shtiv
Member
- Joined
- January 31, 2017
- Messages
- 38
- Reaction score
- 2
- City, State
- Bothell, WA
- Year, Model & Trim Level
- 02 XLT
Hi guys,
To leave out a long story I was replacing servo bores, but had to remove the new ones because of a problem. So while trying to remove the piston broke its tip in the bore. I believe I have bought every tool imaginable to get the thing out. Due to the tight space and the exhaust in the way I cannot get my drill in to try and use screw extractors. Not sure why its so tight in there, but it is. Any ideas for extraction???? I then removed the pan, filter, and tried to remove solenoid pack, but the solenoid pack does not want to come free, seems to be stuck in the part where it attaches to some kind of bore? If I remove the solenoid pack could I access the broken tip?????Thanks for any help.
To leave out a long story I was replacing servo bores, but had to remove the new ones because of a problem. So while trying to remove the piston broke its tip in the bore. I believe I have bought every tool imaginable to get the thing out. Due to the tight space and the exhaust in the way I cannot get my drill in to try and use screw extractors. Not sure why its so tight in there, but it is. Any ideas for extraction???? I then removed the pan, filter, and tried to remove solenoid pack, but the solenoid pack does not want to come free, seems to be stuck in the part where it attaches to some kind of bore? If I remove the solenoid pack could I access the broken tip?????Thanks for any help.