kevin p
Well-Known Member
- Joined
- March 26, 2003
- Messages
- 685
- Reaction score
- 0
- City, State
- Telford Shropshire England
- Year, Model & Trim Level
- 97 4.o sohc
My indicators have been playing up for ages. Somtimes working, sometimes not, flasher unit buzzing etc.
I took the switch off yesterday to fix it.
There are 5 screws holding it together and surprisingly bits of spring and contacts don't fly all over the place when you open it up.
All the copper contacts were very green. I used some contact cleaner, cotton buds and a fine wire brush to clean them. I redistributed the grease on to all the moving parts.
The switch is now very slick and the indicators work as they should. The hardest part was getting the connector blocks off the back of the switch to remove it.
If anyone is having the same trouble and don't feel confident to do it and you can manage without your ex for a few days, just send it to me and I'll have a go at it for you.
Kev.
I took the switch off yesterday to fix it.
There are 5 screws holding it together and surprisingly bits of spring and contacts don't fly all over the place when you open it up.
All the copper contacts were very green. I used some contact cleaner, cotton buds and a fine wire brush to clean them. I redistributed the grease on to all the moving parts.
The switch is now very slick and the indicators work as they should. The hardest part was getting the connector blocks off the back of the switch to remove it.
If anyone is having the same trouble and don't feel confident to do it and you can manage without your ex for a few days, just send it to me and I'll have a go at it for you.
Kev.