"WHITE PINS"...To change the Cabin Air Filter the glove box must be removed. While searching for the Brake Controller connection, I attempted to remove the glove box so I could look behind it. I saw a video on YouTube so I knew what was needed. There are two white pins that secure the Glove Box to the dash. The pin on the left came right out but the pin on the right could not be removed, part of the pin is paddle shaped and that was right up against what looked like part of the passenger air bag. I was able to get a side cutter on the paddle and cut off about 3/16" at that point it came right out. Removed the box saw where the Air Filter goes and reinstalled the glove box. This time the right pin went right back in but the left pin did not want to go in. There is a grove in the pin that must line up with a ridge and the paddle shaped part kept hitting the air bag part. I trimmed off 3/16" off the paddle and the left pin went back in. I used a mirror to see what I was doing with the white pins. If you lay on your back looking up and need to cut the paddles, wear eye protection. The SUV is two weeks old so I was really just exploring the Explorer!