Search results

2006 Explorer Limited passenger front passenger seatbelt locks when being used and just driving along and not using the brakes. It has to be unbuckled, retracted all the way then re-buckled. After a little while it locks again. Have to repeat the process. Is there a fix or does it need replaced...

I found that my problem was the expansion valve. It was not opening up enough to allow freon to flow through and keep the evaporator cold. Fixed and working properly.

2006 Explorer rear A/C not getting cold. I removed all the covers and finally got to the unit. I found that when the rear A/C blower is turned on (with the evaporator cover off) that the tube just past the expansion valve is cold and the evaporator is cold. But after a few seconds you can feel...

The rear A/C does not get cold. The blower works and the air is cool at first then gets warm. There must be a swicth to turn off the freon to the rear or the evaporator would freeze.

I thought that if the freon was constantly flowing through the evaporator and no air was blowing through the evaporator that it would freeze up so no air would flow untill thawed.

I am looking for the solenoid that turns the freon on to the rear A/C expansion valve. I have cold air to the front but the rear, when turned on is cool (not cold) then slowly warms up. What could be the problem?