break lights | Ford Explorer Forums - Serious Explorations

  • Register Today It's free!

break lights

  1. M

    2004 Mountaineer Cruise Control Issue

    Hi all, I'm trying to figure out what is wrong with the cruise control on my '04 Mountaineer. It worked great up until the weather started getting cold, then worked intermittently, now does not work at all. It took several "on" and "set+" pushes to get it to go when it ran on and off, and I'm...
  2. J

    Brake Light and Rear Abs Light!!!

    So here about a month ago, i got in a small accident, rear ended someone only screwed up my bumper. Right afterwards my brake light and rear abs light have came on and stay on, brakes work great. Master cylinder is full, float moves, replaced the rear abs sensor (only has one in the rear...
  3. J

    Break lights flash instead of blinkers

    I recently received a 92 explorer xl from a friend. The blinkers were not working in any way. I replaced the buss flasher and now they work, sorta, the breaklights flash and the blinkers do nothing. I'm not sure what to do next.
  4. W

    No Brake light frustration

    03' explorer... Brake lights went in a strange way. Day before yesterday was having problems getting the gear shift interlock to disengage. Discovered last night that when I pressed lightly on the brakes I had break lights but when I pressed harder, break lights went out. When the brake lights...
  5. D

    Break Lights, Gear Shifter, Door Locks - are they all connected?

    97 EX - V8 AWD Eddie Bauer My break lights, door locks, and gear shift lever all seem to be connected. After break lights stopped working I replaced the break pedal switch 2x's. I have 4 issues: The message center tells me to check the break lights whenever I start the vehicle and apply...
  6. M

    "03 speed control and lighting malfunction

    I have a problem with the speed control which does not activate when the buttons are pressed. There is great malfunction with the rear break lights and turn signals. If th e steering column is in the highest setting the turn signals work but the main break lights do not. If slight up...
Back
Top