eddie bauer

I replaced all my 1997 Explorer Eddie Bauer lighting with LED lights. Brake, tail, reverse, turn, interior and the headlights are now HID bi-xenon everything but the high mount 3rd brake light and instrument panel/dash is now LED. Prior to replacing the stock bulbs with these LED's I had no...

Hello! So I thought I would check really quickly with you guys on opinions with what's going on. My transmission has been shifting really rough lately. When accelerating it's mostly fine, it's rough as in you can feel it noticeably in the car. After a heavy acceleration and letting off the gas...

Is there anyone out there that can help me with a high idle problem? The issue i am having is the engine kicks from normal idle (800ish rpms) to a very high idle (1800 rpms) for no reason. I know on some cars you can hear it click and it idles up a little bit but nowhere near like this...

So, after 18 years of faithful service, it is time to say good-bye to my first brand-new car - my 1999 EB Explorer! I still remember the day we picked her up from Jordan Ford in San Antonio, fresh off the vehicle transport from the factory as she was a special order. She has performed admirably...

Hello Everyone! My name is Nick and I'm a rookie Enthusiast. I lurk on the forums here and decided to make an account to ask questions because of how helpful everyone is. I drive a 98 Explorer Eddie Bauer for the last two years and have always maintained it fluid wise, but I'm looking to learn...

HI guys! I'm looking at a 99 EB with 168k on it. It's in pretty good shape except for a tear on drivers seat bottom(109 to replace) and the cruise doesn't work(I think I can fix). The CEL is on and code indicates downstream o2 sensor bank 2. I've got to be able to pass Ga emissions so the CEL...

(I'm Xavier) Hey all. Sort of new here. I drive an Emerald Green 1993 Ford Explorer (93 is the model year, it was actually assembled in November 1992, so the truck is older than me by several months). It has the Eddie Bauer package and 2-wheel drive. I bought it used last year in December and...

I have an 02 Explorer and found on CL a 04 that has a blown motor... Wondering if I purchase that 04 and grab parts from it to fix my truck (Rear bumper, inside trim, luggage rack swap (mine has paint pealing) and maybe window motors... If color matches I'll swap driver seat b/c mine has tears...

I have a 96 EB and I know there was a trailer harness at one time. Previous owner gave away a wheelchair lift on the back of it, and the people who took it, took part/all of the harness. When I went looking today, I could find nothing of it. I did find a strange looking connector (see...

Been trying to get to the bottom of a bank 1 misfire. Actual codes are for cylinders 1, 2, 3, and random misfire. All happening at different times. Car seems to run fine until 45-50 mph and trying to accelerate, maybe somewhat of a lumpy idle, and/or odd lumpy acceleration. Doesn't feel as...

Went to put in hood struts today and found a switch in the engine compartment laying on the headlight access panel. I have no idea what it may go to. I had the car in a shop about 2 weeks ago for a oil change and a issue with my fog lights. http://imgur.com/jWd23uU http://imgur.com/jojrtDa...

This will serve, hopefully, as a progress thread on my new to me Explorer Back story: I recently acquired a 1996 Ford Explorer Eddie Bauer 4.0 4WD truck. It was owned by my deceased step father since it was new, then to my mother, and now to me. Cracking a little over 193k miles, it has had...

Codes: P0135 P0141 P0155 P0161 P0403 P0443 P0645 I need to know: How many O2 sensors? How many upstream? How many downstream? What sensor should be replaced first based on above codes? What needs to be changed for a/c clutch relay? There is no gas cap on the car so EVAP code is odd unless...

Hey All, First post! I just bought a 97 Eddie Bauer AWD 5.0. Once I parked it next to a similar explorer I noticed it looks much lower than other stock explorers of that era. I did some research and found out I had air ride. I read a bunch of posts about people converting to standard gas shocks...

Friends, I greet all the members of the forum! Please help ! What expression calf and fed mean? The ECU description of the picture. This is a play on words or technical reduction? How important are the differences?

So I've been looking through the forums and found similar problems, but none of the solutions have worked for me, so here it goes. I've got 98 Ford explorer eddie bauer edition, so it's got EATC and a rear blower as well. The other day my A/C stopped blowing air up front, but continued working...

Hey all, My 1996 Ford Explorer EB Edition is having issues with the drivers low beam where it won't come on at all but the high beam does, the bulb on the passenger side lights up in low and high beam. I've changed the bulb in the drivers side and that didn't do anything however I've tested...

Hi everyone, has anyone ever had this problem? My interior done lights (all 3, front, back, cargo) don't come on when I open the doors, but they turn on manually with their individual switches. Also, the dimmer switch by the headlight knob does absolutely nothing. Any ideas?

Just 6 months ago my wife complained about a hard shift going to 4th gear. The fix was new solenoid pak and it's been fine ever since until a few weeks ago she was attempting to back up about a 20 degree incline with 6 persons on board but it would not move. However, shifting to 4X4 low...

So, I've been an Explorer owner for a year and a half now, since I got my beginners permit last year. I had a 99 V8, had a mechanical failure in the steering or brakes, rolled it, lived through it with just bruises, been hunting 2 1/2 weeks now, and I came across a 01 Eddie Bauer with the SOHC...

I have searched and read many posts and Youtube videos regarding this housing, common issues of the leak, and removal procedures... HOWEVER, I can not find a video with the proper steps (even the Ben Grosser link) that truly identifies the set up that I have. I will try to add pictures soon...

Hi. Thanks for letting me join. I'm sure I'll find some great info here. I'm a second and third generation owner who is considering a fifth gen. My second gen was a manual tranny and I loved it. My third gen is new to me and I'm excited to have it. I'm the second owner and just bought it...

I've read a lot of the forums and researched to lift my 97 explorer Eddie bauer edition. I know the TT rule is no more than 2" due to CV joint issues. But I'm looking for about 3" up front and would like to know if anyone could suggest aftermarket cv joints, control arms, or anything to extend...

any suggestions where to go? I did DATC diagnostics test to get no results returned... however I used to have a right(Passenger) Blend door code... I'm not certain if I cleared the error code before. (that could be the problem? passenger blend door stops all heat from entering the cab? I...

Hello all, just wanted to take a minute to say hi & introduce myself. Hi, I'm Michael, I've been a registered member for a couple years, however I've never did the new member introduction. I own 2 Eddie Bauer Ford Explorers. My wife drives the 91 4x4, I drive a 95 2wd. Hers is primarily stock...