evap emission canister

My 2001 4.0 explorer has developed a misfire , it's throwing evap codes as well , it's got all new plugs and wires and a new coil pack so I believe the misfire could be caused by the evap purge valve or evap sylnoid , what do you guys think ?

I recently had Oreillys scan for codes and it read that several componants of my evaporative fuel system was malfunctioning. When I got home, I found the entire back half of the system was missing. I do have the purge valve and lines from front to rear, but nothing else. I found salvage yard...

Hi all, 2007 Ford Explorer Eddie Bauer - about 116,000 miles on it. Honestly, it has treated me great - and I have also treated it great in return. Always up on the scheduled maintenance, and I've probably done more things to it that are not "needed" (depending on who you talk to) than most -...

Hey everyone, I got a code P1443 a week ago, so I got a new canister purge solenoid (google BWD CP509 to see the part I got). After searching this forum, I was finally able to locate the existing valve below the air filter housing. I replaced the valve, but the vacuum tubes connecting to it...

Ok so first, I'm not very seasoned on this forum. I'm usually over on RPS because I drive a '95 splash. My fiance however drives a '99 Explorer. Anyway, I was installing new shocks a month or so ago and when I got to the rear I noticed that the bracket holding the emission canisters was...