four wheel drive

The U-joint (not sure if that is proper name) on my 1995 Ford Ranger, in the four-wheel-drive section seems to have gone bad. The one I’m talking about is a U-joint that goes from a shaft from the pumpkin towards the left side of the vehicle as you’re looking at the front of the vehicle. It’s...

Hi All: Question - on my 05 Sport Trac with 195k miles; I just finished a 750 mile road trip. Everything was fine; arrived at my destination and parked it for two days. Today I started it up and put it in 4-wheel drive to get up a hill (on a dirt road). I don't use 4wd often. After about a...

So here about a month ago, i got in a small accident, rear ended someone only screwed up my bumper. Right afterwards my brake light and rear abs light have came on and stay on, brakes work great. Master cylinder is full, float moves, replaced the rear abs sensor (only has one in the rear...

Hello All! I am in need of assistance from those more mechanically inclined than I. I am having trouble with 4 Low in my 96 Explorer XLT. 4 Auto will engage (it clicks, then you can hear it mechanically engage, and the light comes on), but when I move the switch over to 4 Low I can hear a...

I have an 04 explorer xlt. The four wheel drive does nothing. When I start it the 4 low light stays on, but the 4 wheel drive doesn't work. Where do I start?

I have a 1994 Ford Explorer XLT. I have been having a problem with the 4x4. I used to hear the 4 high engage when it was working, but not when I hit the button for 4 high I don't hear that clank. I was under there about to tap the motor to try that fix but when the button was hit I could hear...

I have recently acquired a 1997 explorer XLT. Whenever i kick it into 4 low, there is about a second or two pause, and then a clunk sound. I am just curious if this is normal, or whether i should avoid using the 4 low because something is wrong. just let me know, thanks. joe

Hello, I am new to this forum and hoping someone can help me figure out why my four wheel drive isn't coming on. I have manual Warn hubs, they have worked great, the problem is that I can't get the four wheel drive to engage. When I start the vehicle, the 4x4 dash light indicators come on like...

Hello. I have a 97 Ranger super cab XLT that will not go into four wheel drive. I have already converted the auto hubs to Warn manuals, they have always worked fine. The problem is that when I turn the switch on the dash the four wheel drive indicator lights on the instrument panel do not...